All Categories
Get it between 2025-03-04 to 2025-03-11. Additional 3 business days for provincial shipping.
▷[BASIC PARAMETERS]---Tonnage: 10T | Stroke: 2’’/50mm| Self height: 4”/100mm | Outer diameter: 2.36’’/60mm | Internal diameter:1.77’’/45mm | Weight:5.5lbs/2.5kg | Effective area: 2.46sq.in./15.89cm² | Usded with Pump: CP-180| Connector: ZG3/8’’ male connector
▷[2INCH STROKE]---With 2’’(50mm) stroke, the hydraulic ram can lift much higher than others. After pressure is released, the jack can retract automatically, super convenient.
▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder.
▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors.The oil pump adopts a composite structure.
▷[WIDE RANGE OF APPLICATION]---This long jack is widely used in the installation and maintenance of large and medium-sized machinery and equipment in the petroleum, chemical, electric power, pharmaceutical, metallurgical, steel, ship, bridge and other industries.
Product Description Smooth surface: Obvious ring mark, firmly fixed without cylinder bursting No stuck when lifting: Large tonnage, enough stroke. Fast Connector + Plastic Dust-proof Cover: The joint adopts threaded ZG3/8" fast joint. Thread locking, compact structure. This product is a split type product, which needs to be used with manual hydraulic pump or electric pump This hydraulic cylinder is often used in power, chemical, steel, bridge, machinery and other industries, not for the CAR. (1). when several hydraulic jacks work at the same time, they should be directed by someone to make the lifting or falling simultaneously. Two adjacent hydraulic jacks shall be supported with wooden blocks to ensure that the gap is secured against sliding. (2). when using hydraulic jack, always pay attention to the sealing part and pipe joint part, and must ensure its safety and reliability. (3). hydraulic jacks are not suitable for sites where acids, alkalis, or corrosive gases are applied. Note: In order to operate correctly, all cylinders need to be connected to a solid lifting surface. The use of cylinders on sandy, clay or loose surfaces can lead to cylinder damage.Technical ParameterModel: 10T/100MMTonnage: 10THeight: 150mmStroke: 100mmOuter diameter: 60mmInner diameter: 45mmWeight: 3.5kgEffective area: 15.89cm^2