All Categories
Portable pH, electro-conductivity (EC), and total dissolved solids (TDS) meter used for hydroponics, greenhouses, and farming applications
Automatic Temperature Compensation (ATC) for accurate readings in fluctuating temperatures and manual one-point calibration using dials for quick custom calibration
Single-line LCD screen for ease of viewing
Interchangeable combined pH, EC, TDS, and temperature probe
Mounting kit and probe holder allows setup as continuous monitor for flexible meter use
The Milwaukee BEM802 is a portable pH, electro-conductivity (EC), and total dissolved solids (TDS) meter with Automatic Temperature Compensation (ATC), manual one-point calibration using dials, a single-line LCD screen, a combined pH, EC, TDS and temperature probe, a mounting kit, and a probe holder. A pH/EC/TDS/temperature monitor is used by researchers and hobbyists to measure nutrient parameters and substance conductivity in hydroponics, greenhouses, horticulture, water-testing, and scientific applications. The single-line LCD screen displays the current measurement. This meter has manual two-point calibration through dials on the front panel. The meter comes with the MA850 combination, amplified, double-junction, gel pH electrode with incorporated EC/TDS probe and built-in temperature sensor and 1m (3.3') cable. The meter uses a 9V battery (included) for approximately 150 hours of continuous use and an auto power-off feature turns the meter off after eight minutes of inactivity to extend battery life. The meter has a factory-installed 110V to 9V power converter. The BEM802 also comes with a mounting kit, probe holder, calibration sachets, and instructions. Specifications pH range0.00 to 14.00 EC range0.00 to 6.0mS/cmTDS range0 to 4000ppmpH resolution.01EC resolution0.01mS/cmTDS resolution10ppmpH accuracy at 20 degrees C+ or - 0.20EC/TDS accuracy at 20 degrees C+ or – 2 percent full scale (F.S.)ATC range0 to 50 degrees COperating temperature0 to 50 degrees C (32 to 122 degrees F)Operating relative humidity95 percentDimensions185 x 82 x 45mm/7.3 x 3.2 x 1.7 inches (H x W x D) Meter weight165g/5.8oz. (with battery) H is height, the vertical distance from lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. A pH meter, also called a sensor or tester, is a device used to measure the acidity or alkalinity of a substance. A pH meter has either a portable or a benchtop body. Many portable meters are handheld devices. Some testers have an internal sensor, and may have a tip and body that fit inside of a container for measurement. A meter is commonly used in many different environments from laboratories to field research and manufacturing facilities. Researchers, manufacturers, and hobbyists use a pH meter in aquaculture, agricultural, wine-making, and water-testing, and for scientific applications. Some pH meters may measure additional parameters such as dissolved oxygen (DO), conductivity (also called electro-conductivity or EC), temperature, total dissolved solids (TDS), salinity, resistivity, or oxygen reduction potential (ORP)/mV. Milwaukee Instruments manufactures electrochemical instrumentation and solutions for water analysis under the Milwaukee and Martini brands. The company, founded in 1998, is headquartered in Rocky Mount, NC. What’s in the Box? BEM802 portable meter MA850 combination pH/EC/TDS probe pH 4.01 and 7.01 calibration solution sachet (20mL) 1413μS/cm calibration solution sachet (20mL) 1500ppm calibration solution sachet (20mL) 9V battery Instructions