YUCHENGTECH Dispersing Disc Dispersion Impeller Dispersing Machine Blade Paddle Impeller Stainless Steel (8×250mm dispersing rod)

Pay with

YUCHENGTECH Dispersing Disc Dispersion Impeller Features

• 1.【Material】▨ The dispersion rod is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust.

• 1.【Material】▨ The dispersion rod is made of 304 stainless steel, with good processability and strong toughness, suitable for use in humid environments, strong corrosion resistance, and not easy to rust.

• 2.【Application】▨ The dispersing rod is widely used in coatings, pigments, dyestuffs, ink, adhesives, medicine, daily chemicals,etc. It is a regular accessory for mechanical equipment such as dispersing machine, grinder, pulverizer,mixer, emulsifier and so on.

• 3.【Note】▨ The stainless steel dispersing rod is not recommended for use in strong acid and alkali solutions.If used, when the acid-base concentration of the operating environment exceeds 4%, it is recommended to use P-T-F-E dispersing rod.

• 4.【Features】▨ The dispersing rod is passivated by sharp edges, hardened on the surface and polished on the surface. It is durable, light and convenient, easy to replace, easy to clean, non-polluting, and easy to operate.

• 5.【Main parameter】▨ The diameter of dispersing rod: 8 mm,the length of dispersing rod: 250mm.

About YUCHENGTECH Dispersing Disc Dispersion Impeller

Working principle: The dispersing disc is an accessory for the high-speed disperser and is connected to the spindle of high-speed disperser. When the main shaft of the dispersing machine is running at high speed, the upper and lower parts of the dispersing disc will rotate, and a turbulent area will be formed at the edge of 2.5-5mm. The upper and lower serrations of the dispersing disc perform high-speed shearing, impact, crushing, and dispersion of materials such as coating, paint, dry powder, solid-liquid, etc., so as to achieve a state of rapid mixing, dissolution, dispersion and refinement. Routine maintenance： There are two parts to be checked before use: one is to check whether the dispersing disc teeth are deformed, about to break off or missing; the other is to check whether the disc body is deformed. Take care to adopt corresponding cleaning methods after use.