Enerpac SCH-603XA Cylinder and Pump Set with RCH-603 Cylinder and XA-12 Air Pump

Pay with

Enerpac SCH-603XA Cylinder and Pump Set with Features

• Single-acting hydraulic cylinder and air-driven pump for hydraulic system applications such as testing, maintenance, or tensioning

• Hollow plunger for allowing pull and push forces

• Two speeds for pumping efficiency and optimal flow

• 60-ton cylinder capacity with 3" stroke for lifting or pushing

• Flow rate of 15 cu. in. per minute at maximum operating pressure of 10,000 psi

About Enerpac SCH-603XA Cylinder And Pump Set With

The Enerpac SCH-603XA cylinder and pump set includes an Enerpac RCH-603 single-acting hollow-plunger hydraulic cylinder and an Enerpac XA-12 air-driven hydraulic pump and is suitable for hydraulic system applications such as testing, maintenance, or tensioning. The cylinder has a 60-ton capacity with a 3" stroke, holds up to 38.20 cu. in. of hydraulic fluid, and contains a hollow plunger for allowing pull and push forces. Single-acting cylinders use liquid pumped through a single port for rod extension and an internal spring for rod retraction to produce continued movement. The cylinder is nickel-plated for durability and has a baked enamel finish for corrosion resistance. The CR-400 female coupler connects the cylinder to the pump. The air-powered pump has a closed hydraulic system for operating in any position. The reservoir holds up to 122 cu. in. of hydraulic fluid. The pump has two speeds for pumping efficiency and optimal flow. The three-way, three-position valve controls the direction of the hydraulic fluid in a single-acting system. The output flow rate is 120 cu. in. per minute at no load or 15 cu. in. per minute at 10,000 psi (pounds per square inch). An external pressure relief valve helps prevent overloading. A ground screw facilitates grounding and helps prevent static sparks. The cylinder weighs 62 lb., has an outside diameter of 6.25", and measures 12.75" high when extended and 9.75" high when collapsed. The cylinder's effective area, or the surface area of the piston rod face, is 12.73 sq. in. (The amount of force a hydraulic cylinder can produce is equal to the hydraulic pressure times the effective area.) The pump weighs 22.4 lb. and has a maximum operating pressure of 10,000 psi. The air pressure range is 30 to 125 psi. Enerpac manufactures high-pressure tools and equipment for industrial applications. The company, founded in 1910, is headquartered in Menomonee Falls, WI. What's in the Box? RCH-603 single-acting hollow-plunger hydraulic cylinder XA-12 air-driven hydraulic pump 6' safety hose Calibrated gauge Gauge adapter