We specialize in hard to find items
All Categories
SHAUSE Lab Liebig Condenser Reflux Column with 24/40 Joint, Length 300mm φ10mm Hose Connection
Share Tweet
SHAUSE Lab Liebig Condenser Reflux Column with Features
-
Size: There is a standard tapered connector on the top, and two glass hose connectors connect the inner pipe through which the coolant flows, the lower hose for the coolant inlet, and the upper hose for the coolant outlet.
-
Material: made of borosilicate glass, resistant to high temperature, acid and alkali, durable, transparent, clean, durable and reusable.
-
Widely used: It is usually used in equipment and can be placed in vertical and inclined positions as reflux condenser and condenser. It can be placed in vertical and inclined position as reflux condenser and condenser.
-
Purpose: Condensation tube is a laboratory equipment used to promote condensation, which is used in distilling liquid or organic preparation for condensation or reflux.
-
Usage: When using, use a plastic pipe to connect the lower connection to the faucet as the water inlet. Since the water temperature at the water inlet is low, and the water temperature after being heated by steam is high, the hotter water will automatically flow upward due to the decrease of density, which is conducive to the circulation of cooling water.
About SHAUSE Lab Liebig Condenser Reflux Column With
Condensing tube is a laboratory equipment used to promote condensation, which plays the role of condensation or reflux. It usually consists of two glass tubes, one inside and one outside. The smaller glass tube runs through the larger glass tube. It is used for distilling liquid or organic preparation, and plays the role of condensation or reflux. Reflux device and distillation are two experimental devices that often use condenser tubes. Condensing tubes are usually used on flasks for experiments under reflux conditions or on distillation flasks for collecting condensed liquids. Condensation of steam occurs on the inner wall of the inner tube. The space enclosed by the inner and outer pipes is used to absorb steam heat and remove it in the water passage area.
