All Categories
Highly resistant to Temp, Chemicals, and Water; High Shear and Peel Strength
Cartridge Only: a Dispenser or plunger is needed. Please see the other kits for different dispensing options
60 Min Working Time - Perfect for Craftsmen, DIY, and Industrial uses
Thixotropic Grey Epoxy Gel (Thick non-dripping gel that also fill cracks & crevices) Thick Viscosity for Vertical Applications
This is a Regulated Dangerouse Goods Item, Air/Expedited Shipments include DG Shipment Fee
Araldite 2014 is a Beige-Grey colored two component, room temperature curing, thixotropic Epoxy adhesive (Thick Gel that will also fill crevices). It is high-strength and very tough, with excellent environmental and chemical resistance. It is It performs well bonding to metals, electronic components, plastics, and where higher operating temperature or aggressive environmental conditions apply. It produces very little ‘out gassing’ when curing, and is suitable for specialized electronics, telecommunications, and aerospace applications. Work Time: 60 minutes Handling Strength: 3 hours Shear Strength: up to 3,150 PSI Resists temperatures up to 275F Low-to-no Shrinkage Color: Grey Dries: Grey Viscosity: Gel/Paste (thixotropic, so also fills voids and crevices) Shelf Life: 3 Years (36 Months) Please Note: This is a special 2:1 ratio cartridge, and is designed to work best with a 50ml cartridge Dispenser with a 2:1 ratio plunger. We strongly advise you use a 50ml Dispenser WITH a 2:1 ratio plunger for this cartridges. If you do not have one, please check out the “MixPac 50ml Dispenser” here on Amazon.