3M Scotch-Weld DP-190 Gray Epoxy Adhesive (50ml/1.7oz w/ Hand Plunger)

Pay with

3M Scotch-Weld DP-190 Gray Epoxy Adhesive Features

• Kit includes 1 Cartridge, 1 Small Hand Plunger, and two mixing options (1 Reusable Mixing Sheet and 1 Mixing Nozzle). Perfect for one-time light-duty jobs

• 8 hours to handling strength, 90-minute set time at room temperature

• excellent shear, peel and shock strength

• Good for bonding metals, wood, masonry products, most plastics and rubbers and PCB mounting

About 3M Scotch-Weld DP-190 Gray Epoxy Adhesive

This is a kit that includes on cartridge, one mixing nozzle one reusable mixing sheet, and one small hand plunger for light-duty dispensing. 3M DP190 is a gray Epoxy Adhesive, room temperature curing, two part epoxy adhesive Kit with included small hand plunger, reusable mixing sheet, and mixing nozzle. Perfect for single-use or occasional / light-duty dispensing needs. The cartridge can also be used with 3M EPX applicator and mix nozzles are required, good peel, cleavage and shock resistance, retains strength after environmental ageing. 1:1 premix system allowing gap filling, good plastic adhesion and suitable for bonding metals, wood, masonry products, most plastics and rubbers and PCB mounting. Please Note: These cartridges are designed to work best with a 50ml cartridge Dispenser. We strongly advise you use a 50ml Dispenser for this, and all 50ml cartridges. However, If you do not have or want this type of gun, then this package may be right for you. It includes a manual hand plunger that can be used to dispense the epoxy, and two extrustion options 1) a mixing nozzle and 2) a reusable mixing sheet. The two parts may prove a little hard to push out, if so then simply take the mixing nozzle off and exturde the two parts onto the mixing sheet and manually mix with a stick or the mixing nozzle manually. Also, If interested, please click on the kit configuration above that includes a Dispenser… or check out the “MixPac 50ml Dispenser”