We specialize in hard to find items
All Categories
ANMBEST Relay Module with Optocoupler High/Low Level Trigger for Arduino (3, 3V Relay 1 Channel)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
ANMBEST Relay Module with Optocoupler High/Low Features
-
It is 1 Channel Isolated 3V 10A Relay Module, each relay can individually switch on/off by an opto-isolated digital input, Standard interface can be directly connected with microcontrollers and be controlled directly by a wide range of microcontrollers such as Arduino, AVR, PIC, ARM, DSP, etc., very convenient.
-
Equipped with high-current relay, maximum load: AC250V 10A, 15A 125VAC, DC30V 10A, DC28V 10A; Trigger current of opto-isolator: 5mA.
-
RELIABLE: Fault-tolerant design, even if the control line breaks, the relay will not move; With optical coupling isolation, triggering more reliable, more stable.
-
EASY to INSTALL: Equipped with screwed terminal plate and fixed bolt holes(diameter: 3.1 mm) on both sides for easy installation.
-
With indication LEDs for Relay output status. The working status indicator lights are conducive to the safe use.
About ANMBEST Relay Module With Optocoupler High/Low
The relay comes with 1 single channel 3V activation relay, ready to control 250VAC at 10A. Extra isolation with opto-coupler at the front end of control. Technical Specifications: Channel: 1 channel Working Voltage: DC 3V/3.3V Main chip: EL817, SRD-DC03V-SL-C Control signal: TTL Normally Opened Compatible Load: 10A 250VAC / 10A 125VAC / 10A 30VDC Quiescent Current: 5mA Maximum Current: 80mA Trigger Current: 2 - 5mA Trigger Voltage(High): 1.5 – 3.3V Insulation resistance: 100MΩ (500VDC) Action time (under rated voltage): less than 10ms Release time (under rated voltage): less than 5ms User friendly interface design. All interfaces can be connected directly via terminal wiring leads. Module Size: 70mmX17mm /2.76X0.67inch(L*W) Input Interface: DC+:connect to power positive DC-: connect to power negative IN: relay module trigger pin Relay Output: Normally Opened (NO) : normally open pin of relay. NO pin is not connect to COM pin when relay off.NO pin is connect to COM pin when relay on; Common pin (COM) : Common pin of the relay; Normally closed (NC) : normally close pin of relay.NC pin is connect to COM pin when relay off.NC pin is not connect to COM pin when relay on; Package includes: 5 x 1 Channel 3V Relay Module with Optocoupler Module
