All Categories
Get it between 2024-12-31 to 2025-01-07. Additional 3 business days for provincial shipping.
MR105-2RS (I.D.=5mm, O.D.=10mm, Thickness=4mm)
mr105-2rs bearings are sealed on BOTH SIDES to keep lubricant in
Made from Chrome Steel (GCr15), durability and resistance to under heavy loads
ABEC Tolerance 1 (P0), Z2 Noise Level for most general use
Static load rating of 135 newtons and dynamic load rating of 366 newtons
NOTE: Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description: Single-row, pre-lubricated, normal accuracy. Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions. With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance. These cost-effective bearings are widely used in areas with low requirements for Mohs hardness. Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selecting Guide: Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris. Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced nitrile butadiene rubber (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification: Model: MR105-2RS Seal Type: Double Sealed Inner Race/Outer Race Material: Chrome Steel (GCr15) Cage Material: Stamping Steel Inner Diameter (d): 5mm Outer Diameter (D): 10mm Thickness (B): 4mm Dynamic Load Rating (Cr): 366N Static Load Rating (Cor): 135N Accuracy Class: P0 (ABEC-1) Noise Level: Z2 Number of Pack: 10 Pcs