JVCC UHMW-PE-20 UHMW Polyethylene Film Tape [20 mil carrier]: 1/2 in. x 18 yds. (Natural/Translucent)

Pay with

About JVCC UHMW-PE-20 UHMW Polyethylene Film Tape [20 Mil

JVCC UHMW-PE-20 UHMW Polyethylene Film Tape is a 20 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no slip/stick tendency. High impact strength and shock-absorbing properties. Outwears Teflon many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; slide tape replacement on top of track saws, dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Wound on a blue poly liner. Made in the U.S. Technical Information- Core: 3 inch diameter - Backing/Carrier: UHMW (Ultra High Molecular Weight) polyethylene film - Adhesive: acrylic - Release Liner: blue poly film - Thickness: 21.8 mils (carrier, adhesive) 1.8 mils (adhesive) 20 mils (carrier) - Adhesion: 60 ounces per inch (to stainless steel test panel) - Tensile Strength: 50 pounds per inch (longitudinal) - Service/Operating Temperature: up to 300F - Elongation: 300 % - Construction: Plastic