Eaton E59-M12A105D01-D1 Intelligent Inductive Proximity Sensor, 3 Wire Sensors, NO Output Type, 4-Pin Micro Connector Type, 12mm Sensing Face Diameter, 4mm Sensing Range, 6-48VDC Voltage

Pay with

Eaton E59-M12A105D01-D1 Intelligent Inductive Features

• Shielded three-wire inductive proximity sensor with 12 mm diameter, NO output, and 4 mm sensing range

• Operating voltage of 6 to 48 VDC

• Four-pin micro DC connector for use with a micro-style female cable (not included)

• 303 stainless steel barrel for resistance to corrosion with a Ryton face cap for impact resistance, mechanical strength, and dimensional stability

• Embedded microprocessor for increased detection range and ability to customize a range of settings using an iProx programming cable and ProxView software (not included)

About Eaton E59-M12A105D01-D1 Intelligent Inductive

Description This Eaton E59-M12A105D01-D1 shielded three-wire intelligent inductive proximity sensor has a 12 mm diameter, a 4 mm sensing range, a normally open (NO) output, and an operating voltage of 6 to 48 VDC. It has a four-pin micro DC connector for use with a micro-style female cable (not included) and is suitable for a wide range of industrial automation applications. The sensor has a 303 stainless steel barrel for resistance to corrosion with a Ryton (PPS, polyphenylene sulfide) face cap for impact resistance, mechanical strength, and dimensional stability, and a 360-degree dual-color LED indicator. It automatically detects a sinking (NPN) or sourcing (PNP) connection and switches the sensor accordingly. It has an embedded microprocessor for increased detection range and the ability to customize output type, range, band sensing, nuisance metal rejection, timing delays, and over/under speed detection using an Eaton iProx programming cable and ProxView software (not included). The sensor can withstand electrical noise up to 20 V/m and temperatures from -40 to +158 degrees F (-40 to +70 degrees C). It is Underwriters Laboratories (UL) and Underwriters Laboratories of Canada (cUL) Listed, and displays the European Conformity (CE) mark. This shielded three-wire intelligent inductive proximity sensor is suitable for automotive, machine tool, material handling, metalworking, and other applications. SpecificationsSensor typeThree-wire, shieldedSensor diameter12 mmSensing range4 mmOperating voltage6 to 48 VDCOutput typeNOConnection typeFour-pin micro DC connectorOverall length2.71" (68.7 mm)Temperature range-40 to +158 degrees F (-40 to +70 degrees C)Load current300 mALeakage currentLess than or equal to 150 microamperesVoltage dropLess than or equal to 2.5 VDCBurden currentLess than or equal to 15 mASwitching hysteresisLess than 15% of rated sensing distanceRepeat accuracyLess than 1% of sensing distanceMaterial construction303 stainless steel barrel, Ryton face cap, polycarbonate end bellVibration rating10 to 55 Hz, 1 mm amplitudeShock rating30g, 11 msEnclosure ratingsNational Electrical Manufacturers Association (NEMA) classes 4, 4X, 6, 6P, 12, and 13Response timeFactory default: 580 Hz (10 V/m); side-by-side mode: 50 Hz (20 V/m); high noise immunity mode: 10 Hz (greater than 20 V/m)Ingress Protection (IP) ratingsIP67, IP69KStandards metUL and cUL Listed, CE marked Eaton manufactures electrical, hydraulic, and mechanical power equipment. The company, founded in 1911, is headquartered in Dublin, Ireland.