We specialize in hard to find items
(1)
Bluonics String-wound Sediment, CTO Carbon & Sediment Filter Set for our Well Water System > 3pcs 4.5" x 20" Whole House Cartridges
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Bluonics String-wound Sediment, CTO Carbon Features
-
𖤐𝐒𝐀𝐅𝐄 𝐀𝐍𝐃 𝐑𝐄𝐋𝐈𝐀𝐁𝐋𝐄⋆☆⋆ Bluonics whole house filter reduces many impurities from your water by 99% and protects your family and appliance from Sediment, Sand, Dirt, and more. Bluonics Sediment filters are environmentally friendly, and chemical-free, with no chlorine, and no change of taste, color, or odor. Do not change acidic or alkaline water levels and has no impact on pH.
-
𖤐𝐃𝐔𝐑𝐀𝐁𝐋𝐄 𝐐𝐔𝐀𝐋𝐈𝐓𝐘⋆☆⋆ Fits most standard size 4.5 x 20” Filter housings. Is highly effective for both residential and commercial water purification, and can be used for the city/municipal or well water.
-
𖤐𝐄𝐅𝐅𝐄𝐂𝐓𝐈𝐕𝐄⋆☆⋆ Removes sediment particles such as silt, sand, rust, dirt, and other undissolved particles up to 20 microns. And removes chlorine, bad taste, odor, and many impurities from tap water to offer sparkling clean, and great tasting water throughout your whole house.
-
𖤐𝐍𝐎𝐓𝐄⋆☆⋆ Please note this filter is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you can check Bluonics RO systems. The cartridges are individually wrapped for freshness. Please unwrap the cartridges before using them.
-
𖤐𝐆𝐑𝐄𝐀𝐓 𝐀𝐅𝐓𝐄𝐑-𝐒𝐀𝐋𝐄𝐒 𝐂𝐔𝐒𝐓𝐎𝐌𝐄𝐑 𝐒𝐔𝐏𝐏𝐎𝐑𝐓⋆☆⋆ Lifetime tech support from Bluonics in Sacramento, California, USA
About Bluonics String-wound Sediment, CTO Carbon
1 Standard Size 4.5”x 20” ( 20 Micron) Sediment Filter. Filters sediment particles such as silt, sand, rust, dirt, and other undissolved particles. Melt-blown Polypropylene Sediment Filters. The main function of a sediment filter is to remove large and fine particles from our drinking water, such as sand, dirt, silt, and rust particles. Our Sediment filters are made of fine melted polypropylene, which is then blown and spun in a cylinder-like form. These filters have a lower density at the surface of the filter with progressively higher density toward the center which enables to capture of particles throughout the entire filter depth. This translates to a longer life and allows better performance of all the following filters, such as Carbon Block or GAC filters. 1 Standard Size 4.5”x 20” Block Activated Carbon Filters (5 Micron) – Block Carbon Filters (5 Micron) are similar in their performance to that of granulated GAC filters, being made of fine coconut shell charcoal carbon tightly compressed forming a cylinder block. Solid-block activated charcoal is superior at adsorption because all the water molecules are forced to travel through the compressed charcoal. Also since it is made of packed carbon it helps to trap suspended particles and dirt. 1 Standard Size 4.5”x 20” ( 1 Micron) Sediment Filter. Filters sediment particles such as silt, sand, rust, dirt, and other undissolved particles. Flow rate: 5-15 GPM (Depend on Feed Water Pressure). Maximum Pressure: 80 psi, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C. Save money and time. Average lifetime 6 months. (Depends on your water quality) Compatible with systems from 3M, APEC, Aqua-Pure, Aquasana, Culligan, Costway, DuPont, GE, Geekpure, Glacier Bay, Global Water, Olympia, Pentek, Smart Aqua Life, The Perfect Water, US Aqua, Whirlpool All mentions of brand names or model descriptions are made strictly to illustrate compatibility. All brand names are registered trademark of their respected
