We specialize in hard to find items
All Categories
ThermoPro TX-2 915Mhz Fitting Rainproof Transmitter Additional Outdoor Sensor for Indoor Outdoor Thermometer Humidity Monitor of 915MHz, Batteries Included
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
ThermoPro TX-2 915Mhz Fitting Rainproof Transmitter Features
-
Note: ThermoPro has two types of sensors with frequency 915Mhz and 433Mhz.Please confirm the sensor model and frequency of you purchased before purchasing.
-
With additional remote sensors, track environmental conditions in 4 locations at most; The sensor's initial channel is channel ONE, when connecting, please ensure to slide button on the back to set Channel 1, 2 or 3
-
Place anywhere with the tabletop and wall mountable design; Requires 2 AAA batteries (Batteries included)
-
Using a 915MHZ signal, the additional remote sensor transmits temperature and humidity readings for ThermoPro indoor outdoor thermometer up to 500 feet/150m range; Temperature accuracy: ±2°F,Humidity accuracy: ±2~3%RH Temperature range: -4°F ~ 158°F (-20°C ~ 70°C); Humidity range: 10% ~ 99%
-
Temperature range: -4°F to 158°F (-20°C to 70°C); Humidity range: 10% to 99%
About ThermoPro TX-2 915Mhz Fitting Rainproof Transmitter
Specifications 1. 433 Mhz transmission frequency. 2. Transmission range up to 200 ft. (range maybe shorter based on interference present). Package Contents: 1 x remote sensor (Transmitter).2 x AAA size batteries(included). NOTE: The remote unit should NOT be placed under the direct sunlight..sunlight will heat up the remote sensor which leads to higher temperature reading than the air temperature which is supposed to be measured.The remote sensor must be always placed upwards so that rain won't get inside the sensor through the vent holes on the bottom of the senor which functions to let the remote sensor detect the environmental temperature and humidity more precisely and quickly. NOTE - Synchronize Remote Sensors 1.Position the remote sensor near the base station 2.Install batteries into transmitter and receiver 3.The RF signal icon (located on the upper left of the base station display) will flash 4.Wait for a moment or press TX button in the outdoor transmitter 5.The remote sensor temperature/humidity will appear
