We specialize in hard to find items
All Categories
RAINPAL RBS022 Brass Rain Barrel Spigot(3/4" Quarter Turn Ball Valve w/ Bulkhead Fitting and Thread Tape)
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
RAINPAL RBS022 Brass Rain Barrel Features
-
Lifetime Warranty against break, crack or leak. Free Replacement Gasket if original gasket ever gets damaged. USA company
-
ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL.
-
Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up
-
Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water.
-
Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included.
-
Freeze Proof, Rust Proof. Contact us if you experience any problem.
About RAINPAL RBS022 Brass Rain Barrel
California prop 65 warning: This product contains chemicals, including lead, known to the State of California to cause cancer and birth defects or other reprocutiove harm. Wash hand after use. Advantage of RainPro Rain Barrel Spigot Design: You don't need to reach inside of the barrel to install. You only need a small opening(Bung hole is big enough) to install. Install in 6 easy steps: Drill, Drop, Pick, Tighten, Wrap and Tighten. Installation Instruction: Tools needed: Pipe Wrench or Channellock Pliers, Power Drill, 1-1/4 inch Hole Saw, PTFE Thread Tape Drill 1.25 inch hole on rain barrel, Center the hole 2-3 inch above the bottom(use eye protection when operation power tool) Drop the bulkhead fitting male piece with gasket in to the barrel Roll the barrel, pick up the fitting from outside Install bulkhead nut and tighten Wrap about 5 rounds of tape on the spigot thread Insert the spigot and tighten
