We specialize in hard to find items
(1)
LamLock RocketGel - 25 Minute Stone Epoxy for Granite, Quartz, Marble, Tile - Easily Fix Chips, Fill Cracks, Repair Defects and Restore Countertops and Tile
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
LamLock RocketGel - 25 Minute Stone Epoxy for Features
-
HOW TO USE: Mix a 1:1 ratio of 16 ounces part A and 16 ounces part B to achieve the precise mixture that will fix chips, nicks, pits, deep scratches, and surface defects on your stone countertop. Spread the mixture on the surface and wipe away excess with a razor blade.
-
PERFECT RESULTS - Excellent for gluing mitered edges, fills and seams, this 25 minute epoxy is simple enough for anyone to use at home. Easily fix any crack in your stone in under 30 minutes with flawless results at fraction of the cost.
-
WORKS ON ANY STONE - Works on Granite, Marble, Travertine, Limestone, Slate, Sandstone, Quartzite. Follow instructions for a mess free project. Made for the novice or DIY expert.
-
EASILY COLORABLE: LamLock RocketGel can be colored using epoxy resin color tint that can be mixed to match any natural or engineered stone.
-
TACK FREE IN TWENTY MINUTES: After LamLock RocketGel sets on the stone, this epoxy glue is tack free in 20 minutes and completely dry in 25! Fully cured in 12 hours. Get the job done fast and easy; DIY experience not required!
About LamLock RocketGel - 25 Minute Stone Epoxy For
LamLock RocketGel is a fast-curing epoxy gel for stone that will harden and be tack-free in 25 minutes, depending on mass size. The appearance after curing will be transparent in thin layers. In layers which are about 1/8", this glue will appear whitish and in thicker layers will be off-white. This glue can easily be colored with pigments allowing you to make it any color you want. It will fully cure overnight, but shortly after it is tack-free it will be hard enough to scrape, grind or polish. May be used wherever a permanent bond is desired. Excellent for gluing mitered edges, fills and seams. May be used indoors or outdoors; however, since epoxies are inherently UV unstable, if left uncolored, the appearance will darken in direct sun light over time. Directions: All surfaces should be clean and dry. Glue should be stored and used at room temperature. Mix by volume, 1 part A to 1 part B. Mix thoroughly at room temperature and apply to material. This glue will harden in 20 minutes in bulk. Otherwise it will take 25 minutes or so in thinner layers. This glue can be colored to match your stone.
