We specialize in hard to find items
(1)
SHDIATOOL Diamond Core Drill Bits 1-1/4 Inch for Hard Stone Concrete Marble Granite Brick Laser Welded Dry or Wet Hole Saws 32mm
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
SHDIATOOL Diamond Core Drill Bits 1-1/4 Inch for Features
-
1-1/4"(32mm) Laser Welded Diamond Dry Drilling Core Bits. Diameter: 32mm(1-1/4"), Total length: 100MM, Thread: 5/8"-11, suitable for angle grinder.
-
Designed for drilling hard granite, marble, engineering stone, concrete, brick
-
Dry or Wet Drilling - use wet will greatly prolong the segment life
-
Easily operate on Angle Grinder; Need an adapter for drill or other machine, such as SDS,hex,Round plus shank
-
Before order, suggest to confirm your needs again,avoid to order wrong size ,so that have to return them, avoid to waste time and delay your project. Because buyers ofter make such mistakes.
About SHDIATOOL Diamond Core Drill Bits 1-1/4 Inch For
Product Name: Laser Welded Diamond Dry Drilling Core Bits Quantity: 1pc 32mm(1-1/4-Inch) Specification: Diameter: 32MM, Total length: 100MM The thread of this core drill bit is 5/8-Inch-11,Recommended Machine: angle grinder If you fit them on drill or other machine, you need an adapter, such as SDS, hex, Round plus shank... Application: Drilling hard granite marble concrete all mature stone Feature: 1. SUPREME Grade and Special bond matrix extends drilling life and improve the working efficiency 2. Laser welded technology avoid segments off when dry working 3. Turbo segments provide aggressive drilling speed (32mm & above) 4. Ideal for drilling the faucet mounting holes in stone countertops, plumbing lines in showers and vanities 5. Vacuum brazed side protection offers clean cut & steel core protection (inside and outside both, 20MM & above ) 6. Dry or Wet Drilling - use wet will greatly prolong the segment life =======THE END====== Available Diameter: 6mm-102mm(1/6 Inch to 4 Inch). Operation Tips for Laser Welded Diamond Dry core bits 1.Fix it on angle grinder tightly and rightly 2.Turn on the angle grinder and let the core bits rotating in the air to check if there is balance problem. 3.Hold the machine very steadily and give gentle pressure 4. Start drilling as per following instructions: 1) place the drill at a 30 degree angle, it will help to position 2) Drilling the material till the hole start to form 3) Bring the drill up into upright position slowly then keep drilling vertically. 5. Do not give too much pressure or sway the core bits when working If find hard to drill, take a break and check the segments. If the segment become blunt, please try to sharp it by drilling a hole on the abrasive concrete and then continue to drill the hard material.
