LGXEnzhuo 110V Portable Line Boring Machine, 45-180mm/1.77"-7.09" Boring Diameter, Hole Drilling Tool with 4.9ft Boring Bar for Excavator Loader

Pay with

LGXEnzhuo 110V Portable Line Boring Features

• PARAMETERS-The maximum processing hole diameter is Ф180mm(7.09inch); The minimum processing hole diameter: Ф45mm(1.77inch); Boring bar: 40*1500MM(1.57*59.06inch); The maximum processing travel: 380mm(14.96inch); The maximum feed depth: 2mm on one side (A3 steel); Surface roughness: Ra3.2; Deviation from circular form≤0.02mm; Rotate speed: 0-83RPM

• 4.9FT BORING BAR-The boring bar is made of high-strength alloy and structural steel, which has the characteristics of high hardness, high precision, high toughness and good wear resistance. The boring bar can be disassembled separately for convenient installation.

• MOTOR -The whole machine adopts 110V constant current motor with low speed and large torque, which can realize stable processing and superior performance. The motor controller is equipped with a dynamic delayed braking program to avoid vibration during shutdown. The control cabinet is installed under the host, which is conducive to safe operation.

• STEPLESS SPEED REGULATION-Stepless speed regulation can be realized for feed processing. The feeding process can be set as required, and it will stop automatically after reaching the limit switch.

• APPLICATION-The drilling machine is a portable processing equipment developed for on-site service of construction machinery. It is mainly used for processing inner holes of small tubes and concentric cross holes. Widely used in excavators, cranes, loaders, cranes and other construction machinery.

About LGXEnzhuo 110V Portable Line Boring

Attention Use fixed fixture for installation, and use different tool holders according to different diameter ranges. Please confirm the diameter of the machining hole before use to select a suitable tool holder. The drill pipe and feed screw that are not used frequently shall be coated with mud oil. The feed box shall be filled with proper lubricating oil every six months. If the spindle box and feed box are not used for a long time, they should be sealed and stored. Before machining, add proper lubricating oil to guide posts and screws. Parameters Type: XDT40 Portable Line Boring Machine Max. processing hole diameter: Ф180mm Min. processing hole diameter: Ф45mm Max. processing travel: 380mm Max. feed depth: 2mm on one side (A3 steel) Surface roughness: Ra3.2 Deviation from circular form≤0.02mm Rotate speed: 0-83RPM Boring bar: 40*1500MM Power: 1.5KW Package Content #022398 1 x Line Boring Machine XDT40 in two packages