We specialize in hard to find items
(2)
5 GAL Armor AR500 High Gloss Solvent Based Acrylic Concrete Sealer and Paver Sealer
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
About 5 GAL Armor AR500 High Gloss Solvent Based Acrylic
The Armor AR500 is a high gloss, pure acrylic lacquer made from high quality U.S. manufactured resins. It penetrates deep into the pores and bonds to the concrete from below the surface. It will enhance dull or faded surfaces, and leave behind a long-lasting, UV resistant high gloss finish. The Armor AR500 can be applied to both interior and exterior surfaces. It is a great sealer if you are looking for an easy to apply, professional grade product for garage floors, restaurant floors, driveways or pool decks. The high gloss finish left behind by the Armor AR500 is resistant to UV rays, hot tire pickup, some staining, efflorescence, exposure to fresh and salt pool water, and changes in weather and temperature. The Armor AR500 can be applied to unsealed surfaces, and to surfaces previously sealed with a solvent based acrylic (it is suggested to always apply to a test area first to verify compatibility). Coverage: 5 gallons covers up to 500 square feet in two coats. Coverage varies depending on porosity and applicator. Can be applied with a roller or pump sprayer. Benefits: Breathable Can be applied with a roller or sprayer Non-yellowing and UV resistant Will reduce concrete dusting and deterioration caused by surface abrasion Offers resistance to water, stains, chemicals, and salt damage Offers superior adhesion to a variety of concrete and paver surfaces Will bring out the color in dull or faded concrete and pavers Offers a durable high gloss finish Self-priming, easy recoat and low maintenance Can be applied to unsealed surfaces, or surfaces previously sealed with a solvent based acrylic. Product packaging may differ from photo in order to meet shipping regulations. For best results, apply 2 coats, 24 hours apart. Apply in the late afternoon or early evening when air and surface temperatures are declining. Do not apply to red clay brick, slate, tile, flagstone, or other natural stone surfaces. For those surfaces consider the Armor WL550 or Armor SX5000.
