All Categories
Get it between 2025-02-11 to 2025-02-18. Additional 3 business days for provincial shipping.
Ultra Bright & Energy Saving ----- Maximum 70W can emit the brightness equivalent to a 350W halogen lamp, More brightness, More energy saving.
Multi-mode Adjustment ----- COB LED With RF Wireless Remote controller. 8 Dynamic modes,10 Brightness level can be adjusted. Easily switch the brightness of the light (25%, 50%, 100%), Accept smooth dimmer effect to meet your lighting needs on different occasions, Adapt to use in various scenarios.Remote Distance more than 15m at open area.
High-quality ----- There are 336pcs high-brightness diode LED FLIP chips on board, The chips are evenly arranged on the aluminum board, The brightness is soft and without dead spots. 8.7x4.4IN Aero-grade aluminum board, Enough hardness and high heat-dissipation efficience to get longer life-span.
Multiple power supply options ----- Use by connecting any DC 12V power, Max current 5A ,Such as Car battery, AC to DC power supply, Power transformer, Adapter...
Easy to use ----- The thickness of the product is less than 4mm, Easy to carry and install. No heat sink is needed When connecting DC 12V constant voltage Power, For longer life-span, Please add a heat sink when input DC 13V or higher.
Board size:8.7x4.4IN Thickness:0.16IN Emitting diameter:8x3.9IN Power:About 35W at DC 12V, About 70W at DC 14V Max input current: DC 5A Color temperature:2800K-3000K CRI: Ra>80 Beam angle: 120° Luminous efficacy: >110LM/W Remote distance: More than 15m at open area Application: LED garden lights outdoor, Car lamp,Outdoor/Indoor room decor, DIY led strip lighting... Package include: 1pcs COB LED Panel Light 1pcs 11 Keys remote(Without battery,please add a CR2025 battery) 1pcs Receiver(Solder on LED) Please note If the remote doesn't work, please do following steps to re-pair the remote controller: 1. Put CR2025 battery into remote. 2. Pug off the power of main unit and plug in later 5 seconds. 3. Press 'speed -' and'speed +' key together in 5 seconds . 4. The LED panel will flash one time . 5. After this operation , the main unit will recognize the new remote controller.