Colloidal Tru Hard | Colloidal Silica Concrete Densifier (1 gal)

Pay with

Colloidal Tru Hard | Colloidal Silica Concrete Features

• Prevent concrete dusting. Will not discolor, blush or peel over time.

• Shown to reduce or eliminate Radon and meets all VOC regulations

• Permanently fills porosity/ capillaries of concrete creating a permanent bond that makes concrete less porous and harder

• Typical coverage is 250-350/gallon first coat, second coat 350-500 (optional) depending on surface; NOTE: Not recommended to use with Acid Stains.

• Significantly reduces water permeability and resists deep penetration of many liquids including oils and many chemicals

About Colloidal Tru Hard | Colloidal Silica Concrete

Colloidal Tru Hard Densifier is an outstanding concrete treatment that comes in a one gallon container containing one gallon of concentrate - to which you 4 gallons of potable water to make a full 5 gallons of material. Colloidal Tru Hard Densifier is a state of the art concrete hardener and densifier made up of nano silica particles and other chemical and mineral enhancers used to prevent dusting and increases durability of concrete slab floors. It reduces the transmission of unhealthy Radon. Colloidal Tru Hard is designed to be used in the process of concrete polishing to seal, increase sheen, reflectivity, and the beauty concrete floors. It works by reacting with concrete deep throughout the slab, blocking up the capillaries to prevent water transmission by forming a permanent insoluble gel barrier, and reacts with unused cement to form more concrete on a micro scale. It will also perform extraordinarily with concrete slabs that are decades old. Colloidal Tru Hard Densifier is recommended as a densifier and moisture vapor blocker prior to concrete where long lasting, dense concrete is desired, including big box stores, warehouses, factories, schools, and residences. It is also used as a densifier and moisture vapor blocker prior to the application of cementitious overlays, epoxy coatings, traditional flooring materials, and in concrete polishing applications. As a densifier used in the floor polishing process, Colloidal Tru Hard will provide a better polishable surface, thus improve gloss and clarity. Typical coverage is 250-350/gallon first coat, second coat 350-500 (optional) depending on surface NOTE: Not recommended to use with Acid Stains.