All Categories
Get it between 2024-11-22 to 2024-11-29. Additional 3 business days for provincial shipping.
Raycity Shower Barrier : Shower threshold measures 1.2 inches wide, and 2 inches high, we offer five sizes for you to choose from 39", 67", 74", 98" and 118", water dam feature:The long and flexible design can be cut into various shapes at will.Ideal for curbless showers and other areas where water needs to be contained.
Versatile Shower Water Stopper : Shower barrier can be used anywhere water needs to bewet and dry separation, such as bathrooms, tubs, washers, kitchens, and water heaters on concrete floors. Set a perfect barrier to prevent providing complete protection against water over flow.
Easy to Install : Who were shower water splash guard can be installed by tearing off the adhesive strip on the back. for better stop water flow leak guard and firmness, we suggest seal the bottom edge after gluing with clear silicone caulk, which can also extend its service life.(Notice:1. In corners, we recommend 45-degree splicing installation. 2. For better stickiness, heat the glue on the bottom of the weather strip with a hair dryer.)
Safe-Flexible Material : Silicone shower dam is made of 100% rubber, which is safe, collapsible, durable, and heat-resistant. It can be stepped on and bent, as well as wheelchair-accessible shower thresholds.
100% After-Sales Service: Raycity are dedicated to providing you with the best possible experience. Contact us with any questions or concerns and we'll respond within 24 hours. (It is a 2 inch shower threshold. If you needs a higher flexible shower dam threshold, Please search in our store.)
Raycity Silicone shower threshold strip dam available in five size 39"/67"/74"/96"/118" . shower water guard strip sticky adhesive strip adheres to almost any smooth surface, including walls, windowsills, door gaps, floors, tiles, etc.is a great molding strip for modern kitchens. Package Includes:1 x shower Threshold water dam Specifications: Material: Silicone Color: White Height:2 Inches width: 1.2 Inches How to use: 1. Wipe off the water on the ground, keep it dry and dusty 2. Determining the position of the water retaining strip and mark it with a pen on the ground. 3. Remove the adhesive and install the water barrier in the marked position. 4. Seal the rubber strip at the position where the two ends of the water retaining strip are in contact with the wall. 5. Apply glue on both sides of the water stopper and apply evenly. 6. Allow to dry and no contact with water in at least 24 hours.