Wzglod Chimney Fan, 60W/80W 7 Leaves Chimney Smoke Evacuator Induced Draft Fan, Fireplace Exhaust Fan, Flue Fan, Chimney Draft Inducer, Chimney Exhaust Fan,A,60W.

Pay with

Wzglod Chimney Fan, 60W/80W 7 Leaves Chimney Smoke Features

• Electric Draft Inducing Fan Help Exhaust Fireplaces, Pizza Ovens, Wood Stoves, 60W/80W Chimney Fan for Flue Diameter 14-18cm.

• It is very suitable for chimney accessories. The chimney induced draft fan generates suction and induces the rapid discharge of smoke to prevent the smoke from being unable to exit the flue smoothly due to the poor chimney.

• This Type of Induced Draft Fan is Used on Household Chimneys /Fireplace , and the Outlet Temperature Should Not Exceed 80 Degrees. The Induced Draft Fan Should Be More Than 6 Meters Away from the Fire Source.Otherwise the Induced Draft Fan Will Be Burnt.

• Easy to install, very quiet, suitable for most types of chimneys, and does not require professional technicians to install. Not only will the smoke be discharged quickly, but it also has excellent performance.

• The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), and the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.

About Wzglod Chimney Fan, 60W/80W 7 Leaves Chimney Smoke

Solve Smoke ProblemsElectric Draft Inducing Fan Help Exhaust Fireplaces, Pizza Ovens, Wood StovesThe most widely used and recognized smoke evacuator in smoke extraction systems. Thanks to the classic system, an ideal balance is achieved between ease of installation and safe use, thanks to the high quality while following the most stringent parameters of European certification.Specification:Voltage: 220V ( Americas 110V-120V voltage, we will be equipped with a voltage converter)Power；60W/80WColor: picture colorNote1. Domestic chimney adopts induced draft fan, and the outlet temperature should not exceed 60 degrees. Otherwise, the induced draft fan will be damaged. Install the power cord at least 0.5 square copper wire2. When installing or removing, please turn off the power switch to avoid electric shock.3. The interface with the smoke evacuator must be fixed with waterproof insulating tape.4. The installation at the interface with the chimney must be firm, and the interface must be closely integrated with the chimney to get the best effect.5. When the induced draft fan stops working, attention should be paid to the backflow of smoke causing smoke to emerge.6. The smoke evacuator is placed on the chimney. The smoke exhauster must be more than 6 meters away from the fire source, otherwise the induced draft fan will be burned. The temperature of the chimney cannot burn the insulation layer of the power cord.Package Included1 *Induced draft fan