West System Starter Kit #2: 1 Gal 105B, 1 Qt 205B, 300 Mini Pumps

Pay with

About West System Starter Kit #2: 1 Gal 105B, 1 Qt

THE KIT INCLUDES: 1 GALLON OF WEST SYSTEM 105-B EPOXY RESIN 1 QUART OF WEST SYSTEM 205-B FAST HARDENER 1 WEST SYSTEM #300 PUMP SET105 Epoxy Resin: The key component in a wide variety of boatbuilding, restoration, and repair projects 105 Resin is the base material of the WEST SYSTEM family of products, on which all of the WEST SYSTEM compounds are built. The resin is a clear, light amber, low-viscosity liquid epoxy resin. Formulated for use with WEST SYSTEM hardeners, it can be cured in a wide temperature range to form a high-strength solid with excellent moisture resistance. It is designed specifically to wet out and bond with wood fiber, fiberglass, reinforcing fabrics and a variety of metals. An excellent adhesive, 105 will bridge gaps and fill voids when modified with WEST SYSTEM fillers and can be sanded and shaped when cured. With roller applications, it has excellent thin-film characteristics to flow out and self-level without "fisheyeing." The resin cures clear so that you can achieve a natural finish when coating with varnish. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyesters. · We strongly recommend the use of WEST SYSTEM dispenser pumps. 205 Fast Hardener: 205 Fast Hardener is a medium-viscosity epoxy curing agent. It is used in a majority of situations, at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. When mixed with the 105 Resin in a five-part resin to one-part hardener ratio, the cured resin/hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and coating properties. Not intended for clear coating. Mini Pump Kit is a must for precise metering of all group sizes of WEST SYSTEM Resins and hardeners Mix Ratio, Resin:Hardener Pot life at 72°F (22°C) Cure to a solid state Cure to maximum strength Minimum recommended temperature Pumps required