We specialize in hard to find items
All Categories
FPVDrone 8CH PPM Encoder&Pixhawk I2C Splitter Expand Module for Pixhawk Flight Controller APM Flight Controller
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
FPVDrone 8CH PPM Encoder&Pixhawk I2C Splitter Features
-
★The design of the PPM Encoder is based on the Paperazzi PPM Encoder.
-
★The whole project is based around the ATMEL ATMEGA328p AVR processor and all timing is done within interrupts so accuracy and stability is optimized.
-
★The PPM Encoder plugs into the PWM servo output ports of any R/C receiver and encodes them into a PPM pulse suitable for many autopilots (e.g. Pixhawk). Modifications to the R/C receiver are not necessary.
-
★Expands the i2c port to allow up to four additional peripherals to connect to pixhawk. Use the 4-wire cable to connect the i2c splitter and add a compass module, external led, digital airspeed sensor, or other peripherals to your vehicle.
-
★Important Note:The firmware comes pre-configured to read 8 Channels. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it.
About FPVDrone 8CH PPM Encoder&Pixhawk I2C Splitter
PPM Encoder Features The PPM Encoder plugs into the PWM servo output ports of any R/C receiver and encodes them into a PPM pulse suitable for many autopilots (e.g. Pixhawk). Modifications to the R/C receiver are not necessary. The whole project is based around the ATMEL ATMEGA328p AVR processor and all timing is done within interrupts so accuracy and stability is optimized. Firmware is free and was created by John Arne and Olivier Adler. The design of the PPM Encoder is based on the Paperazzi PPM Encoder. Important Note: The firmware comes pre-configured to read 8 Channels. In case you would like to change the settings of the PPM encoder to invert the PPM signal and change the fail safe pre-defined values you will need an AVR ISP programmer in order to reprogram it. The jumper on the board no soldering default. In this case the board powered by FC ·Dimension(mm): 28 x 19 x 5 ·Weight(g): 9(include all wire) Pixhawk/APM flight control only one I2C interface, such as the need to connect more than one I2C peripheral, you can use the line board; Pixhawk - I2C points line board with five completely parallel vertical 1.25 4 a socket, convenient connection in the form of 1 drag 4 four I2C peripherals, for example, at the same time use the external compass and RGB modules. I2C line board and Pixhawk flight control the appearance of the connection (please note that this price includes only the I2C line board and cable) : Size: 12 × 30 × 6mm Note that if the existence of the cable portion of red and black lines received the wrong location, please ignore, because it does not affect the use, but the color sequence is incorrect, you can swap your own if necessary. Package includes: 1 x PPM Encoder for pixhawk 1 x 10Pin input cable 60mm 1 x 4Pin output cable 100mm 1 x I2C breakout board 1 x Cable 60mm
