All Categories
Get it between 2025-01-03 to 2025-01-10. Additional 3 business days for provincial shipping.
| NEXT GEN PIR | This microwave sensor emits microwave signals to detect moving objects, the same way a radar speed detector works. It is more accurate and consistently outperforms a PIR motion sensor, which tends to be less sensitive in high temperature and over sensitive in low temperature.
| CLEAN DESIGN | Clean and modern profile with a classic UFO shape. Body housing made with premium polycarbonate material stronger than ABS plastic and gives a beautiful smooth finish. Standard white low profile allows this sensor to blend seamlessly into your ceiling.
| BETTER DETECTION | Features 360-degree detection with 30-ft diameter detection range. Radar waves are capable of penetrating glass, paper, plastic and thin walls. Sensitivity of this sensor can be adjusted by turning the knob on the body of sensor.
| PHOTOCELL ENABLED | With built in photocell operated by switch for daylight (24/7 mode) or night mode (only trigger after dark), making the sensor a perfect replacement of PIR sensors.
| SAFE TO USE | This sensor emits microwave power at 10 milliwatt, which is 1/100 of a normal cell phone (typically 1-2 watts of power). Suggested install height 8-12 ft., compared to a cellphone which is normally used within 3 ft. You can use this radar motion detector safely and with peace of mind.
J.LUMI YCA2002 microwave motion detector is the next generation motion sensor. It works by emitting 5.8 GHz electro-megnetic waves and receive echoes bouncing off moving objects. It is capable of detecting even the slightest movement within its 30-ft range. The energy emitted is minimal and safe to use. Compared with traditional PIR motion sensors, microwave motion detectors are less likely to be affected by warm temperature, and could detect objects behind glass, wooden doors or think plaster walls.