We specialize in hard to find items
All Categories
Seco-Larm E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft (15m) sensing distance; Replaced E-961-S50TB
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Seco-Larm E-964-S50TB Multi-Frequency Single Features
-
4 selectable frequencies to reduce interference, Up to 50ft (15m) sensing distance
-
Small size for a less conspicuous installation, Simple to install
-
Built-in AGC control to filter out lighting disturbances, Signal strength indicator for easier alignment
-
LED indicators for power, signal strength, and trigger; Weatherproof for outdoor as well as indoor use (IP65)
-
Mounting hardware included, Dimensions: 3-11/16" x 2-3/8" x 1-13/16", Weight: 2.6-oz
About Seco-Larm E-964-S50TB Multi-Frequency Single
Seco-Larm E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft (15m) sensing distance; Small size for a less conspicuous installation SECO-LARM E-964-S50TB Multi-Frequency Single Photobeam Sensor; 4 selectable frequencies to reduce interference; Up to 50ft (15m) sensing distance; Small size for a less conspicuous installation; Simple to install; Built-in AGC control to filter out lighting disturbances; Signal strength indicator for easier alignment; LED indicators for power, signal strength, and trigger; Weatherproof for outdoor as well as indoor use (IP65); Mounting hardware included Key Features 4 selectable frequencies to reduce interference Up to 50ft (15m) sensing distance Small size for a less conspicuous installation Simple to install Built-in AGC control to filter out lighting disturbances Signal strength indicator for easier alignment LED indicators for power, signal strength, and trigger Weatherproof for outdoor as well as indoor use (IP65) Mounting hardware included Specifications Number of Beams: 1 Current Draw: Transmitter 15mA@12VDC/Receiver 30mA@12VDC Infrared LED Wavelength: 940nm Operating Voltage: 10~24VDC Interupt Speed: 50ms LED Beam Spread Angle: Approximately ±10° LEDs-Red: Indicates transmitter and receiver are not aligned or beam is broken (Alarm) LEDs-Yellow: Indicates receiver's signal is weak or beam is broken (Signal) LEDs-Green: Indicates connected to power Output: NO/NC relay (set by jumper, default is N.C.) 0.5A@30VAC/VDC Enclosure: IP65 Operating Temperature: -13°~131°F Operating Humidity: 0~95% Dimensions: 3-11/16" x 2-3/8" x 1-13/16" Weight: 2.6-oz
