BIGTREETECH CB1 V2.2 Core Control Board for 3D Printers to Run Klipper, As CM4 Compatible with Rasp-Berry Pi4, BTT Pi4B, Manta E3EZ M8P M4P M5P Mainboard, 1GB DDR3 RAM, 100M Ethernet, Support HDMI

Product ID : 52658329

---

  Share   Tweet

share more:

---

Galleon Product ID 52658329

Shipping Weight 0.07 lbs
I think this is wrong?

Model

Manufacturer BIQU

Shipping Dimension 3.15 x 2.56 x 1.65 inches
I think this is wrong?

See more product information!

-

₱ 3,032

Price Tracker

+ ₱ 150
International Shipping

via AIR

Get it between 2025-03-13 to 2025-03-20. Additional 3 business days for provincial shipping.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

BIGTREETECH CB1 V2.2 Core Control Board for 3D Features

• 【BTB Design】 BIGTREETECH CB1 core control board features the same board to board header as CM4. Thus BTT CB1 can be directly mounted both on your Rasp-berry Pi and BIGTREETECH Pi4B base board to run klipper in a highly cost-effective way.

• 【Powerful System】BTT CB1 adopts quad-core 64-bit Cortex-A53 @1.5GHz processor and Mali G31 MP2 GPU, supporting OpenGL3.2; Equipping with 1GB DDR3 memory chip, CB1 is programmable and powerful to run Linux and supports Debian.

• 【Interfaces】BIGTREETECH CB1 comes with HDMI 2.0A interface to support 4K displays. And also onboard USB2.0 interface.

• 【Internet Info】BIGTREETECH CB1 core control board supports 100M Ethernet and 100M Wifi 2.4G/802.11 b/g/n.

• 【Easy to Run Klipper】With the same BTB connector as CM4, CB1 can be directly mounted on BIGTREETECH Manta Series Motherboards: Manta E3EZ/Manta M4P/Manta M5P/Manta M8P to run Klipper easier and more reliable. Combining with BTT Pi4B or Rasp. Pi base board, CB1 can also be used on SKR MINI E3 V3.0/SKR 3/SKR 3 EZ/SKR Pico/Octopus Pro etc. to run Klipper.

About BIGTREETECH CB1 V2.2 Core Control Board For 3D

Parameters: 1. CPU: ALLWINNER H616, Quad-core Cortex-A53 @1.5GHz 2. GPU: Mali G31 MP2, Support OpenGL3.2 3. RAM: 1GB DDR3L 4. Product Size: 40mm x 55mm 5. Mounting Size: 33mm x 48mm 6. Input Voltage: 5V±5%/2A 7. Output Voltage: 3.3V±2%/100mA 8. Output Voltage: 1.8V±2%/100mA 9. WiFi: 2.4G/802.11 b/g/n Compatible Motherboards: 1. Board to board: Manta E3EZ, Manta M4P, Manta M5P, Manta M8P (all BIGTREETECH Manta series motherboards ) 2. Need Pi4B / Rasp. Pi Base Board: SKR MINI E3 V3.0, SKR 3, SKR 3 EZ, SKR Pico, Octopus Pro ...