We specialize in hard to find items
All Categories
Sunhans Indoor WiFi Signal Booster SH24BTA-N 3000mW 35dBm 2.4GHz 802.11b/g/n Wireless Signal Amplifier Repeater Extender for House, Office, UAV, IP Cameras, RC Equipment
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Sunhans Indoor WiFi Signal Booster SH24BTA-N 3000mW Features
-
2.4Ghz frequnecy band, Max. 3000mW (35dBm) output power; Low noise, High Gain, High Performance; With Power and Signal Activity LED Indicators; Aluminum-alloy case by CNC, anti-interference; Small size, Safe and Power saving; Full kit, easy to install; For house, office, UAV, IP cameras, RC equipment, etc
-
Which works together with an indoor Wireless Access Point to improve its operation range and performance. In certain conditions the unit is able to double the range of the wireless device. Full power, easy installation and operation; Strengthen radio signal to Increase the effective range and coverage area for Wi-Fi communication; Save wiring costs, easily build a wireless infrastructure for home or business use; Make broadband wireless application in possible coverage
-
Maximum output power of 3000mW by the Booster. The input power range for this model is 0 - 20dBm, around 10-13dBm is the best. Too low input power, the output power of booster will be low or does not work, if too high(near to 20dBm or up), the booster just as a connection device, does not work, but will weak the signal because of signal attenuation
-
Sunhans SH24BTA-N WiFi Booster is an indoor solution 3000mW (35dBm) bi-direction Booster designed for 2.4GHz IEEE 802.11b/g/n wireless LANs. Transmit gain: 15 - 18dB, Receiver gain: ≤12dB, This unit comes with an easy plug-and-play installation
-
Package Contents: 1 x SH24BTA-N wifi booster; 1 x RG316 cable with SMA connectors (20cm); 1 x 6dBi omni antenna; 1 x power supply; 1 x English user manual
About Sunhans Indoor WiFi Signal Booster SH24BTA-N 3000mW
Features: 2.4G, Max. 3000mW output power; Aluminum-alloy case by CNC, anti-interference; Small size, Safe & Power saving; Full kit, easy to install; For house, office, UAV, IP cameras, RC equipment; Technical specifications Model: SH24BTA-N Operating range: 2400~2500MHz Channel width: 20Mhz&40Mhz Supported standards: IEEE 802.11b/g/n Operation mode: Bi-directional, half-duplex, time division duplex Connector type: To radio SMA female (hole inside). To antenna RP-SMA male (pin inside) Output power: 3000mW (35dBm) Input power: 0 ~ 20dBm Transmit gain: 15 - 18dB Receiver gain: is less than or equal to 12dB Noise figure: = 3.5dB typical Power adapter: 12V/2A DC, 100~240V Operating temperature: -20 C to +70 degrees C degrees Operating humidity: Up to 75% relative humidity Material: Cast aluminum LED light: Power status LED and activity status LED Booster weight: 94g Booster size: 8.4 x 4.7 x 1.7cm Package weight: 380g Package size: 21.3 x 13.5 x 5cm Package Included: 1 x SH24BTA-N Wifi Signal Booster 1 x RG316 cable with SMA connectors (20cm) 1 x 6dBi omni antenna 1 x power supply (US/EU Plug) 1 x user manual Attention: The power amplifier is not suitable for use in high power devices Use Step 01: Remove the Antenna from the Wireless Router (Access Point). Step 02: Use this cable (RG316) to connect Amplifier 'input' port with router 'output' port: note that cable is in standard spec. Step 03: Connect the antenna with 'output' port of Amplifier. Step 04: Power the amplifier with the matching source adapter: DC 12V.
