We specialize in hard to find items
All Categories
SunnyPro P-VIP200/0.8 E20.8 Projector Bulb Compatible for ACER H5360 H5360BD V700 H5370BD H5380BD Smart 55 Unifi 55w UF55 UF55W OPTOMA PRO260X PRO360W PRO160S GS316 GS318 SD220U XD220U ES318
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
SunnyPro P-VIP200/0.8 E20.8 Projector Bulb Features
-
Compatible with ACER H5360 H5360BD V700 H5370BD H5380BD SMART 55 Unifi 55w UF55 UF55W OPTOMA PRO260X PRO360W PRO160S GS316 GS318 SD220U XD220U ES318
-
Brand new lamp with new housing. It is NOT just the bare lamp or bare bulb.
-
All lamps are produced by our own factory
-
All lamps are tested at our factory before leaving the facility
-
Cheaper Bare Lamp without Housing Also Available
About SunnyPro P-VIP200/0.8 E20.8 Projector Bulb
Model Number:P-VIP200/0.8 E20.8 Application:Commercial,Engineering,Indoor,Professional,Sailing Wattage:200W Type:Bare Lamp with housing Average Life (hrs):2500 Be used in projectors: for ACER H5360 H5360BD V700 H5370BD H5380BD SMART 55 Unifi 55w UF55 UF55W OPTOMA PRO260X PRO360W PRO160S GS316 GS318 SD220U XD220U ES3189 steps to replace the projector lamp 1.Gather the necessary tools, screwdriver. 2.Turn off TV or Projector. 3.Remove Lamp Compartment Door. 4.Remove Lamp Assembly. Carefully pull out the lamp assembly and disconnect any power cords that may still be connected to the lamp assembly. Put it aside and don't get it confused with your new lamp! 5.Clean Lamp Compartment. Dust gets everywhere and while you have the projector open, use a soft cloth or micro-fiber cleaning cloth to remove any loose dust from the lamp compartment. 6.Insert New Lamp Assembly. Carefully reconnect any power cables to the new lamp if present and slide the new lamp into the compartment in the same orientation that the original lamp came out. 7.Replace Lamp Compartment Door. Set the lamp compartment door back into place and securely screw in the door without screwing it in too tightly. 8.Reset the lamp timer. Instructions on how to do this should be covered by the instruction manual. 9.You're Done! Enjoy your projector or TV again and make sure you have a backup lamp handy in case the lights go out unexpectedly.
