We specialize in hard to find items
All Categories
Fluke Norma 4000 3 Phase High Precision Power Analyzer with PP54 Channel, IEEE488 and Ethernet interface, PI1 Process Interface, 0.1% Accuracy, 0.3V to 1000V, 10 A Current Range
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
Fluke Norma 4000 3 Phase High Precision Power Features
-
Power analyzer to test and develop power electronics such as electric motors, inverter drive systems, lighting systems, power supplies, automotive components, and transformers
-
Has three power-phase channels, measures single-phase or three-phase current and voltage, analyzes harmonics and Fast Fourier Transformation (FFT), and calculates power and other derived values
-
Process interface to simultaneously record torque, speed, and mechanical power (included in some configurations)
-
Includes PC software for setup, data download, analysis, and report writing
-
Complies with EN 61010-1 2nd Edition 1000 V Category II (600V Category III), Pollution Degree 2, Safety Class I
About Fluke Norma 4000 3 Phase High Precision Power
The Fluke Norma 4000 3-Phase High Precision Power Analyzer is designed for engineers to test and develop power electronics such as electric motors, inverter drive systems, lighting systems, power supplies, automotive components, and transformers. This configuration has three power phase channels, available in a choice of range, sampling rate, and other specifications. The analyzer measures single-phase or three-phase current and voltage, analyzes harmonics and Fast Fourier Transformation (FFT), and calculates power and other derived values. The analyzer has 341 kHz or 1 MHz sample rates for detailed signal analysis, and the average time is user-selectable (from 15 milliseconds to 3,600 seconds). It accurately displays dynamic events on all phases at the same point in time with simultaneous parallel acquisition of all phases. For detailed specifications, including measured values and channel details, refer to the Fluke Norma 4000/5000 datasheet. The optional process interface allows simultaneous recording of torque, speed, and mechanical power of up to four motors. Each of the eight inputs can be switched between analog (voltage) and digital (frequency) input. The interface allows synchronous capture at a sample rate of 34 kHz and includes four analog outputs. The process interface is included in FLUKE-N4K 3PP42IPB, 3PP42IP, 3PP50IP, and 3PP54IP. The analyzer has a 5.7" color display, with user-selectable background lighting and contrast, and can download data by RS-232 or USB connection (cable sold separately). IEEE488/Ethernet connection (IFC2) is also available in FLUKE-N4K 3PP42IB, 3PP42I, 3PP42IPB, 3PP42IP, 3PP50I, 3PP50IP, 3PP52IB, 3PP54I, and 3PP54IP. PC software (included) facilitates setup, data download, analysis, and report writing. The analyzer has 4 MB memory for storage of measured values. Inputs are galvanically isolated to avoid short circuits in all applications. The analyzer complies with European Union (EN) 61010-1 2nd Edition 1000 V Category II (600V Category III), Pollution Degree 2, Safety Class I. Industrial power meters are commonly used to test and evaluate power systems. Specifications Number of power phase channelsThreeBandwidthDC to 3 MHz or to 10 MHz depending on input moduleBasic accuracy0.2%, 0.1%, or 0.03% depending on input modulesVoltage input range0.3V to 1000VCurrent input range (direct, not via shunt)0.03 mA to 20 amp depending on input moduleFrequency rangeDC and 0.2 Hz to sample rateFast Fourier Transformation (FFT)Measured values: U, I, P per phase. Order: 1st to 40th harmonics, maximum half sample frequency.Working temperature range5 to 35 degrees C (41 to 95 degrees F)Weight5 kg (11 lbs.)Dimensions*150 x 237 x 315 mm / 5.9 x 9.3 x 12.4 inches (H x W x D) *H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back. Industrial power meters measure electrical properties such as voltage, current, power, and energy to monitor the efficiency and performance of a power system. They are used for designing, installing, and maintaining industrial, commercial, and residential power supply systems. More advanced models have features for comparing and recording multiple measurements taken at different times and in different areas. Fluke Corporation manufactures electrical testing tools and software for industrial and commercial applications. The company, founded in 1948, is headquartered in Everett, WA. What's in the Box? Fluke Norma 4000 power analyzer (3) PP42 power phase input modules (in FLUKE-N4K 3PP42IB, 3PP42B, 3PP42, 3PP42I, 3PP42IPB, and 3PP42IP) (3) PP50 power phase input modules (in FLUKE-N4K 3PP50, 3PP50I, and 3PP50IP) (3) PP52 power phase input modules (in FLUKE-N4K 3PP52IB) (3) PP54 power phase input modules (in FLUKE-N4K 3PP54I and 3PP54IP) Power supply cable Fluke NormaView PC software Instructions Test certificate Calibration values
