We specialize in hard to find items
All Categories
2X RP-TNC Male WiFi Antenna 2.4GHz / 5GHz Omni Dual-Band 6dBi Antennas for Linksys WRT54G Wireless Router Signal Booster Cisco AIRONET Trimble Robotic Total Stations
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
2X RP-TNC Male WiFi Antenna 2.4GHz / 5GHz Omni Features
-
Frequency: 2.4GHz / 5GHz || Gain: 6dBi Connector: RP-TNC Male(Hole-inside)tilt-and-swivel RP-TNC male ( reversed polarity, inside threads with female pin)
-
Compatible with: Linksys Wireless Router(WAP11, WRT54G, WRT54GL, WRT54GS, WAP54G); Cisco AIRONET(340, 350, 1200, 1310, 2700, 2800, 3700, AIR-ANT2524DW-R, AIR-ANT5135DB-R, AIR-ANT5135DW-R)
-
Compatible with Trimble S3 Total Station, S5 Total Station,S6 Total Station, S7 Total Station, S8 Total Station,VX Total Station, SPS610 Total Station,SPS620 Total Station,SPS700 Total Station,SPS710 Total Station,SPS720 Total Station,SPS730 Total Station,SPS930 Total Station,RTS633 Total Station,RTS655 Total Station, RTS773 Total Station,RTS873 Total Station,RTS573 Total Station,TSC2 Data Collector, TSC3 Data Collector,Spectra Precision Ranger 3 and so on
-
Compatible with Cisco:340, 350, 1200 AP, 1310, AIR ANT3338 ; Proxim:Stratum MP, Harmony AP
-
Compatible with Wireless Access Points & cards that have RP-TNC antenna jacks: Cisco/LinkSys Wireless Access Points have an RP-TNC (female) jack that is compatible with this antenna.
About 2X RP-TNC Male WiFi Antenna 2.4GHz / 5GHz Omni
2.4G 5G 5.8G Dual Band RP-TNC 6dBi Antenna Kit for Linksys WRT54GL WRT54G WRT54GS WAP54G WRT54G-TM Omni WiFi w/ RP-TNC connector Signal Booster for Cisco Linksys Router Omnidirectional dipole antenna: Radiates signal with a beam of 360 degrees; also receives a signal from 360 degrees around it. It is suitable and compliant for all the following applications:. IoT wireless & M2M: Bluetooth, ZigBee, and ISM. Since it is vertically polarized, it is compatible with many machine-to-machine communication applications, remote monitoring, and telemetry applications. 2.4GHz WiFi applications: 802.11N, 802.11G, 802.11B. Compatible with Bluetooth devices, Wireless Access Points & other wireless devices. As Bluetooth antenna: Send or receive signal to devices in all directions (360-degree horizontal beamwidth). As client antenna: Connect to access points in any direction. Portable size: Easily fits in a laptop case.. . Compatible with Wireless Access Points & cards that have RP-TNC antenna jacks: Cisco/Linksys Wireless Access Points have an RP-TNC (female) jack that is compatible with this antenna.. RP-TNC Connector Characteristics and Details: This can be used to mount the connector (and thus the cable) on the wall of a network enclosure (to weatherproof the cable connection ) or mount the connector on a case, panel, or Printed Circuit Board (PCB). Weatherproofing: Seal the hole where the female connector is mounted, by placing an O-ring between the wall of the enclosure and the bulkhead nut & washer on the female connector. RP-TNC is a round screw-type connector, with nickel-plated brass. Nickel-plated brass is the best plating alloy for corrosion resistance. RP-TNC is similar to BNC except that whereas BNC has a slotted mating collar, RP-TNC has a screw-down type connector. RP-TNC's screw-down connector performs better than BNC in the microwave spectrum.
