2PCS CP2112 Debug Board USB to Serial Adapter USB2.0 I2C Communication Module 2.0 Micro USB 2112 Evaluation Kit USB-to-SMBus API Specification Multifunction Serial Adapter Module

Product ID : 55554828

Available options (color, size, package, etc). Prices may vary.

---

  Share   Tweet

share more:

---

Galleon Product ID 55554828

UPC / ISBN 701715539259

Shipping Weight 0.03 lbs
I think this is wrong?

Model

Manufacturer DORHEA

Shipping Dimension 2.28 x 0.98 x 0.31 inches
I think this is wrong?

See more product information!

-

₱ 1,505

Price Tracker

+ ₱ 150
International Shipping

via AIR

Get it between 2024-12-04 to 2024-12-11. Additional 3 business days for provincial shipping.

---

BUY NOW!

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

---

• Electrical items MAY be 110 volts.
• 7 Day Return Policy
• All products are genuine and original
• Cash On Delivery/Cash Upon Pickup Available

Pay with

2PCS CP2112 Debug Board USB to Serial Adapter Features

• CP2112 debug board USB bus power supply: 4.0 to 5.25V; Self-powered: 3.0 to 3.6V; I/O voltage: 1.8V to VDD

• CP2112 highly integrated USB to SMBus bridge controller integrates a USB2.0 full-speed function controller, USB transceiver oscillator. Integrated 194-byte one-time programmable ROM for storing customizable product information

• 8 GPIOs configurable as input/output and open-drain/push-pull, configurable clock output for external devices 48MHz to 94KHZ, read/write SMBus device toggle LED

• All customization and configuration options can be selected through a simple GUI-based configurator, standard HID class devices do not require complex firmware and driver development, and the CP2112 device enables fast USB connectivity with minimal development effort.

• MCU-2112 debug board suitable for USB dongle, handheld controller, point-of-sale products, data logger

About 2PCS CP2112 Debug Board USB To Serial Adapter

CP2112 debug board USB bus power supply: 4 to 5.25V Self-powered: 3.0 to 3.6V I/O voltage: 1.8V to VDD GPIO can be configured as input/output and open drain/push-pull 512 byte SMBus data buffer Integrated 194-byte one-time programmable ROM for storing customizable product information On-chip power-on reset circuit On-chip regulator: 3.45V output CP2112 has USB2.0 to I2C interface, USB bus power supply, and no external power supply is required It is a two-wire I2C/IIC/TWI/SMBUS interface, supporting four transmission speeds of 20KHz/100KHz/400KHz/750KHz It can provide power supply+3.3V and+5V output Interface signals include SCL, SDA, GND,+5V and+3.3V The two-wire synchronous serial port I2C/IIC/TWI/SMBUS is an active serial port The working temperature is - 20 ℃~+70 ℃ First connect the CP2112 evaluation board to the PC Then connect one end of the USB cable to the USB port on the computer Connect the other end of the USB cable to the USB connector on the CP2112 evaluation board Connect SDA, SCL and grounding pins on CP2112 to the SMBus device The external pull-up resistor is not required if the pull-up resistor on the CP2112 evaluation board is used. Please standardize your use The SMBus interface terminal block and access headers are included to easily interace SMBus devices to the evaluation board The terminal block can be used to connect wires to the board, and the access connectors can be used to connect scope probes to the SMBus interface for debugging The signals that are accessible through these two connectors are SDA, SCL, GND, and the external pull-up voltage signal Package include: 2 x CP2112 debug board