All Categories
Fiber Cable Description: OS2 LC ST Fiber Patch Cable 80 Meter | 10Gig Singlemode Duplex Corning 9/125 Fiber Optic Core/Cladding. OFNR (riser rated), zip-cord reinforced, 2.0mm outer diameter, yellow PVC jacket. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries.
Fiber Cable Description: OS2 LC ST Fiber Patch Cable 80 Meter | 10Gig Singlemode Duplex Corning 9/125 Fiber Optic Core/Cladding. OFNR (riser rated), zip-cord reinforced, 2.0mm outer diameter, yellow PVC jacket. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries.
Fiber Patch Cable Details: 80 Meter (262.46 feet), Duplex (2 fiber strands), 1Gbps/10Gbps, Single Mode Fiber (SMF), LC to ST Terminated, Fiber Optic Patch Cables / Jumper Cords.
Core / Cladding: Corning 9 micron diameter fiber core / 125 micron diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding.
Optical Mode Type: OS2 (9/125 Singlemode) - 9 micron core, 125 micron cladding. 10 Gigabit speed from 5-10km at 1310nm (10Gbase-L) and 30-40km at 1550nm (10Gbase-E) with 0.4 dB/km maximum attenuation, atm applications. Audio, video, data services supported. ISO / IEC 24702
Durable Construction, Commercial Grade | Cost Effective and Built to Last | 100% Lifetime Warranty on All Fiber Cables Direct Products. Superior packaging for safe delivery anywhere in the world, using any available carrier and selected delivery priority.
80 Meter LC ST Singlemode Fiber Patch Cable | 10Gb OS2 Duplex 9/125 SMF LC/UPC to ST/UPC Jumper Cord.A durable, OFNR (riser rated), yellow PVC jacket, 2.0mm outer diameter, zip-cord reinforced, UV resistant, water resistant, fire retardant and immune to electrical interference. Assembled with 10Gb Corning 9/125 micron SMF core/cladding and terminated with duplex, small form factor (sff), 1.25mm ceramic ferrule LC connectors (includes pre-installed duplex lc clips), and push/lock 2.5mm stainless steel ferrule ST connectors for easy install and management in high density cable environments. Connectors have a maximum connector loss of 0.50dB with a typical connector loss of 0.30dB and typical return loss of -55dB.Engineered for fast and reliable Singlemode connectivity between switches, transceivers, media converters, patch panels and other SFP Singlemode equipment & applications. Typically used in vertical pathways, shafts, conduit, and spaces between building floors. Single mode fiber is designed for long distance 10Gb Ethernet applications with maximum attenuation of 0.4 dB/km and a transmission distance of 5km to 10km @ 1310nm / 30km to 40km @ 1550nm. All FiberCablesDirect cables are tested in accordance with ANSI/TIA/EIA-455-171-A-2001 attenuation standards by a qualified fiber optic technician then carefully packaged with test results. We also provide a lifetime warranty on all our products we sell.There is no order too large or too small. Bulk orders for lengths above 35m may have an additional day or 2 lead time depending on the quantities ordered, however, most orders ship the same day. Expedited USPS and UPS services available including Next-Day, 2-Day, 3-Day and Ground shipping options. FedEx is also available for international orders.We do it right with a 100% lifetime warranty, quality products, superior packaging and fast delivery anywhere in the world.