We specialize in hard to find items
(2)
Frequency to Voltage Converter Module 0~200hz to 0~10V Conversion Module Digital to Analog Converter
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Frequency to Voltage Converter Module 0~200hz to Features
-
HIGH QUALITY-- The module is made of premium material, with long lifespan and high realiability
-
FUNCTION-- The converter module can convert 0~200hz digital into 0~10V analog , easy to use
-
GOOD PEROFRMANCE-- The Converter Module adopts professional and practical design for premium working performance.
-
USED FOR-- The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.
-
FEATURE-- Input pulse level of 5/12/24V can be directly input without resistance.But input frequency should maintain more than 0.5 seconds.
About Frequency To Voltage Converter Module 0~200hz To
Specification: Item Type:Frequency to Voltage Converter Module Size:4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in Relationship,Linearity: 20Hz to 1V 100hz to 5V 200hz to 10V Package List: 1 x Converter Module Note: 1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage. 2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter. At 24 levels, the power supply needs to be powered by 24VDC 3. The signal input end is isolated by diaphragm. Guaranteed anti-interference ability. 4. If you need to use PLC, support NPN type. Must have a ground wire. 5, if you need to use the encoder, the encoder is required to continue to rotate at a constant speed for more than 0.5 seconds. 6, frequency and voltage conversion module, response time is about 0.3-0.5 seconds. 7. If the signal input is turbine flow, etc., due to signal matching, an 817 diaphragm and a resistor must be added to match the flowmeter to normal function. 8. Correspondence in use If there is a deviation, you can adjust the blue potentiometer on the board to calibrate. At the time of shipment, we have adjusted the F/v potentiometer to a certain correspondence. It is generally not recommended to adjust it by itself.
