All Categories
【Parameter】 DROK Power Supply Module input volt range is DC 5.3-32V; Output volt range is DC 1.2-32V which is variable. Output current can reach to 8A and Output Power can reach to 120W for long-time use. If enhance heat dissipation, this converter can reach 12A and 160W output.
【Characteristics】 This Buck Converter is equipped with LCD Display, Acrylic Case and Heat Sink. LCD Screen can display input/output voltage, output current and output power. Voltage precision is 0.05V, current precision is 0.005A. Acrylic case can keep the converter board away from dust, which is protective. Heat Sink can keep module 120W for long-time using in a low temperature. If you want to reach maximum power 160W, please improve heat dissipation.
【Easy Operation】 A user manual will be included in package, which can help you easier to operate. The button can control ouput voltage ON/OFF status, and you can set the default output state is ON/OFF for the next time. The potentiometer can help you to adjust volt amp in a simple and fast way.
【Protection】 It has reverse-connect protection, short circuit protection and over current protection. When you connect the input wire reversely or short circuit, the module will not burn. And roate the CC potentiometer to set over current protection value you want.
【Application】 The volt conversion board can be used for 5v 6v 9v 12v 24V 30V 32V 3a 5a 10a devices, like solar panel, lab, experiment, RV, All-Terrain Vehicle, car, battery charger, LED stripes, etc.
Parameters: Input voltage range: DC 5.3-32V (limit 35V; the lowest input 4V can achieve buck, but less than 5.3V input voltage, current measurement is inaccurate) Output voltage range: DC 1.2-32V (must ensure that the input voltage is higher than the output voltage, the minimum voltage difference is 0.8V) Output current: 8A for long-term stable work, strengthen the heat dissipation can reach 12A Output power: natural cooling 120W (within 8A), enhance cooling can reach 160W Voltage display: resolution 0.05V, range 0-32V Current display: resolution 0.01A, range 0-12A Conversion efficiency: about 96% Working current: 25mA or so Soft start: Yes (high power with load module may fail to start) Input reverse connection protection: yes Output stop current from feeding back: none (if you charge the battery, first power the module then connect to the battery, and ensure that the battery voltage is lower than the output voltage) Short circuit protection: yes Dimension: 82x 52x 32mm Attentions: 1. Module input IN- cannot short circuit with output OUT-, otherwise constant current function will be invalid. 2. Please make sure that the power of the power supply is greater than the power required by the output load. Please reduce the power when the module is extremely hot. Package Including: 1x Power Supply Module