We specialize in hard to find items
All Categories
DKARDU 2 pcs TXS0102 2 Bit Bidirectional Voltage Level Converter 2-Way Level Conversion Board Module I2C IIC Switch with Dupont Cable
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
DKARDU 2 pcs TXS0102 2 Bit Bidirectional Voltage Features
-
【Features】: This two-bit non-inverting converter is a bidirectional voltage converter and can be used to establish digital switching compatibility between mixed voltage systems.
-
【Two ports】: Utilizes two distinct configurable power bars, with ports A supporting operating voltages from 1.65V to 3.6V while tracking VCCA power, and ports B supporting operating voltages from 2.3V to 5.5V while tracking VCCB power supply.
-
【Translation Capability】: This enables support for both lower and upper logic signal levels while providing bi-directional translation capability between any voltage node at 1.8V, 2.5V, 3.3V and 5V.
-
【Live】: When the output enable (OE) input is low, all I / O are placed in the high impedance state, which significantly reduces the quiescent current consumption of the power supply.
-
【Best state】: To ensure the high impedance state when turning on or off, the OE must be connected to GND through a pulldown resistor; the minimum resistor value is determined by the driver's current sourcing capability.
About DKARDU 2 Pcs TXS0102 2 Bit Bidirectional Voltage
Product Description Description: This two-bit non-inverting translator is a bidirectional voltage-level translator and can be used to establish digital switching compatibility between mixed-voltage systems. It uses two separate configurable power-supply rails, with the A ports supporting operating voltages from 1.65 V to 3.6 V while it tracks the VCCA supply, and the B ports supporting operating voltages from 2.3 V to 5.5 V while it tracks the VCCB supply. This allows the support of both lower and higher logic signal levels while providing bidirectional translation capabilities between any of the 1.8-V, 2.5-V, 3.3-V, and 5-V voltage nodes. When the output-enable (OE) input is low, all I/Os are placed in the high-impedance state, which significantly reduces the power-supply quiescent current consumption. To ensure the high-impedance state during power up or power down, OE should be tied to GND through a pulldown resistor; the minimum value of the resistor is determined by the current-sourcing capability of the driver. Package includes: 2 x TXS0102 level conversion module 4 x 5pin header 1 x 20pin male and female DuPont cable
