All Categories
How to use Insert the narrow end of the glass reservoir into the rubber grommet stopper on the wood base. Add pure essential oil into the bottom of the reservoir, and do not oil drops in a glass bottle outside. Put the glass cap into the glass bottle. Connect the power supply to the base and plug the power supply into a wall socket. Turn on the switch bottom in the ceramics base from left to right side – the near is lower output setting and the other is higher output setting. How to clean General clean Remove the glass cap. Using dropper adding alcohol into glass bottle, turn on the power for 5 to 10 minutes in order to clean up the micro-tubes. If the nozzle blockage, repeat using dropper with alcohol wash the micro-tubes and the tube until it is cleaned. Dispense the unused alcohol in a safe place, example: sink. When the diffuser is dry, the cleanup is done. Cautions Please use natural essential oils. In order to avoid product failure, do not use the product with perfumes, flammable solvents synthetic, fragrances or anything containing impurities or solids. Do not use essential oils that contain massage oil, such as jojoba oil, almond oil and grape seed oil. Please add the appropriate amount of essential oil depending on the frequency of use. Do not add too much oil at one time as contact with air will cause the oil to oxidize, become stiff and clog the nozzle. Avoid using thicker oils, such as sandalwood, cypress, etc., alone. Or immediately after their use, do a general cleaning to prevent the nozzle from clogging.