uxcell 604ZZ Deep Groove Ball Bearing 4x12x4mm Double Shielded Chrome Steel Bearings 3-Pack

Pay with

uxcell 604ZZ Deep Groove Ball Bearing 4x12x4mm Features

• 604ZZ (I.D.=4mm, O.D.=12mm, Thickness=4mm)

• 604zz bearings are shielded on BOTH SIDES to keep lubricant in

• Chromium Steel long-life bearings, smooth and low noise

• ABEC Tolerance 1 (P0), Z1 Noise Level for most general use

• Static load rating of 360 newtons and dynamic load rating of 970 newtons

About Uxcell 604ZZ Deep Groove Ball Bearing 4x12x4mm

NOTE：Please refer to the picture and select right type of bearings before your order (Sealed or Shield on BOTH or SINGLE side of the bearing). Suffix on the bearing just for differentiating between Sealed and Shield type of bearing. It would not affect the use of our product. Description:Single-row, pre-lubricated, normal accuracy.Deep Groove Ball Bearings are one of the most widely used rolling bearings. They are used to accommodate radial and axial loads in both directions.With small friction and high-limit speed, Ball Bearings are cost-effective and require little maintenance.Chromium Steel (GCr15) made with heat treating, provides high and uniform hardness, good wear resistance, and high contact fatigue performance.Suitable for all kinds of industrial equipment, micro motor, small rotary motor, office equipment and so on. Selection Guide:Shields (Designation Suffix Z/ZZ) - High speed. Protect from dirt and debris.Sealed (Designation Suffix RS/2RS) - Made of sheet steel reinforced NBR (oil- and liquid-resistant). Lower limit speed than Shield Bearings. Specification:Model: 604ZZShielded Type: Double ShieldedInner Race/Outer Race Meterial: Chrome Steel (GCr15)Cage Material: Stamping SteelInner Diameter (d): 4mmOuter Diameter (D): 12mmThickness (B): 4mmDynamic Load Rating (Cr): 0.97kNStatic Load Rating (Cor): 0.36kNAccuracy Class: P0 (ABEC-1)Noise Level: Z1Number of Pack: 3 Pcs