All Categories
Get it between 2025-06-09 to 2025-06-16. Additional 3 business days for provincial shipping.
【10000W SCR Voltage Regulator】New upgraded third generation, equipped with intelligent fan, standard aluminum housing safe and durable super power electronic voltage regulator, suitable for lighting engineering lantern control, heating wire, boiler heating control, electric iron, AC brushed motor control, etc., It is an ideal voltage regulator for you.
【Performance】Operating voltage AC 110V-230V. Maximum power 10000W (resistive load), long term operating power 7000W. Voltage adjustable from AC 0V to near input voltage. Full copper 75A super large current terminal.
【Accurate】The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input.
【Usage】Connect the SCR voltage regulator to the front of the circuit of the electrical appliance. The ''input' and "output" lines are connected (do not distinguish between zero line and firewire). Rotate the potentiometer rotary lever to achieve light and dark dimming, speed regulation, voltage regulation and temperature regulation, easy to use.
【Precautions】Regulator is not suitable for brushless motor. The load should not exceed the specified maximum power. Pay attention to the temperature for the first use. If the temperature is high (more than 80 ℃), please enhance heatsink. Otherwise, the module and the appliance will be burned out. If connect to inductive load or Capacitive load, the power must leave Two-thirds (2/3) margin.
Parameter:● Operating Voltage: AC 110V-230V.● Maximum Power: 10000W (resistive load).● Long Term Operating Power: 7000W.● Voltage Adjustment: Adjustable from AC 0V to near input voltage.● Size: 4.37×3.03×1.45 in/111×77×37 mm.● Weight: 9.87 oz/280 g.Features:● The trigger circuit is unique, the control voltage is accurate and there is no hysteresis, the resistive load is turned off to 0, and after starting, it will be adjusted from 10V, adjust to the supply voltage that is closest to the input.● SCR increases dual protection varistors and RC snubber circuit.● Upgrade fan with switch, intelligent control, good heat dissipation effect, long service life.● High temperature fire FR4 Circuit board.● Standard high-grade exquisite aluminum shell is safer and more practical.● Full copper 75A super large current terminal.Application:● Using the new two-way super-power SCR, the resistive load can be adjusted between 0 -- input voltage for use by electrical appliances.● Such as: Electric furnace, Water heater heating, Lighting dimming, large brushed motor speed control and so on. Thereby achieving the effects of dimming, temperature regulation and voltage regulation.● Can supply power less than 10,000 watts (resistance load) of large electrical appliances, because of the high power, so the general home appliances or small factory enough to use.Precautions:● The load should not exceed the specified maximum power. Pay attention to the temperature for the first use. If the temperature is high (more than 80 ℃), please enhance heatsink. Otherwise, the module and the appliance will be burned out. ● If connect to inductive load or Capacitive load, the power must leave Two-thirds (2/3) margin.Package Included:1 × AC 110V-220V 10000W SCR Voltage Regulator