CGOLDENWALL Ball Press Pressure Tester Meter Heat Testing Tool Apparatus mainly for heat testing AQY Test pressure 20N±0.2N Ball Pressure Tester

Pay with

CGOLDENWALL Ball Press Pressure Tester Meter Heat Features

• MATERIAL-ALL made by stainless steel, which is durable and strong compared to carbon steel or alloy.

• Parameter-ball diameter: 5mm; total test pressure：20N±0.2N； support: solid stainless steel cylinder with diameter 50mm and length 100mm.

• INSTRUCTIONS- 1. According to the test requirements, first place the ball pressure test device in the heating box for a long enough time to ensure that the ball test device has reached a stable test temperature before the test begins. 2. Place the component under test on the support base so that it is in direct contact with the support base

• 3. Place the surface of the component under test in a horizontal position and hold the steel ball against the surface. The test should be performed in a heating box with a standard temperature.

• 4. After the test reaches the time specified in the standard, remove the ball from the sample, and after cooling according to the requirements of the standard, measure the diameter of the steel ball indentation to determine whether it is acceptable.

About CGOLDENWALL Ball Press Pressure Tester Meter Heat

Application: This experiment device is designed according to the "ball pressure test " requirements in GB2099 standards, mainly used for heat testing in household and similar plug sockets products. It is the necessary equipment for relevant manufacturers and qc department for product quality inspection and control. Technical parameters: 1. Ball diameter 5mm(R2.5mm) 2. Total Test pressure 20N±0.2N 3. Sample support stand:diameter 50mm, length100mm,stainless steel solid cylinder 4. Producing Materials: all made of stainless steel 5. Reference standard: GB4706.1-2005,GB2099.1-2008,GB/T5159.21-2006,IEC60695-10-2:2003 Notes: Supporting the use of the Ball pressure test we also Need two extremely hot ovens additional.