We specialize in hard to find items
All Categories
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Signal Booster Features
-
cell phone signal booster
-
cell phone signal booster
-
cell phone signal booster
-
cell phone signal booster
About Signal Booster
This Antenna Mount Pole is 10" length, 1. 5" in diameter, is meant for outdoor use and can be applied to building roof or wall. Installation Steps 1 - Attach Wall Mounting Bracket to a flat surface or wall with screws in the 5 provided holes of the bracket. 2 - Place Pipe Bracket onto the U-Bolt with the U-shapes from both parts facing each other to create a circle. 3 - With the Pipe Bracket and U-Bolt assembly in hand place the Pole Mounting Bracket next to the Pipe Bracket. 4 - Put the split washers over the end of U-Bolt threads. 5 -Place the Nuts over the U-Bolt threads and tighten slightly to make sure none of the previously assembled components fall off the U-Bolt. 6 - Place the Pipe in between the Pipe Bracket and the U-Bolt and set at desired height and tighten nuts to secure the pipe in place. The antenna mount bracket is to be installed on a flat surface via screws, then the pole can be attached to the bracket with the pipe bracket. When mounted correctly the pole will be upright, in the optimal position for a outdoor antenna to be mounted to the pole. Package Contents Pole U-Bolt Pipe Bracket Wall Mounting Bracket 2-Split Washers 2-Nuts
