All Categories
Installation Steps: ① Outdoor Yagi Antenna: Mount on the roof as high as possible and keep horizontal to pointing the tower. ② Booster and Indoor Whip Antenna: Indoor whip antenna connected to booster, put them in the center of the house or where you want to boost signal but can not close to window. ③ Note: Need to keep indoor antenna and outdoor antenna separately by wall, and far away from each other more than 10 meters. Technical Specification: Frequency Range:824-849MHz,869-894MHz Max. Output power:22dBm Max. Gain (dB) :62dB I/O Port : N-female on both ends Power Supply :Input AC100~240V 50/60Hz,output DC 5V 2A Package: 1 * Booster 1 * Power Adapter 1 * Mounting Screw Kit 1 * English User Manual 1 * Indoor Antenna 1 * Outdoor Antenna with 10m (about 32.8ft) Cable This is a Consumer device. Before use, you must register this device with your wireless provider and have your provider's consent.Most wireless providers consent to the use of signal boosters.Some providers may not consent to the use of this device on their network .if you are unsure ,contact your provider.You must operate this device with approved antennas and cables as specified by the manufacturer.Antenna must be intalled at least 20cm(8 inched) from any person.You must cease operating this device immediately if requested by the FCC or a licensed wireless service provider. Warning:E911 location information may not be provided or maybe inaccurate for calls served by using this device.This device maybe operated only in a fixed location for in-buiding use.