All Categories
Optimized to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels
Precise RPM control through PWM with a wide RPM range from 500RPM to 1800RPM
Clean cable management with Daisy-Chain cables to connect multiple fans together with a single PWM extension cable
Excellent low noise performance thanks to a high airflow/RPM ratio to minimize bearing and motor noises
High cooling capacity at 2000 RPM to cool even the most powerful hardware components. Connect directly to an A/D-RGB equipped motherboard with included Motherboard adapter.
The Phanteks M25 fan builds upon the award winning T30 fan to keep next gen hardware cool with high airflow cooling performance. The M25 fan blades are specifically optimized to perform the best with fine mesh/dust filters, heatsinks and radiators with reduced RPM levels. This optimization keeps unwanted bearing noises at a minimum while also leaving plenty of cooling headroom, when necessary, by going full speed. By sharing some of its design with the T30, the M25 stands out by delivering higher airflow through heatsinks and radiators with lower RPM levels with exceptional value. The wide RPM range, up to 1800 RPM, can be precisely controlled through PWM to ensure the M25 is excellent for both quiet and high-end gaming systems. Color: Black Matte blade / Black Fan Frame. Materials: PBT (Polybutylene terephthalate), PBT (Polybutylene terephthalate). Fan Size: 140 x 140 x 25 mm. Bearing Type: Hydraulic Bearing. Blade Geometry: Nine Blades Design- Black PBT. Rated Voltage: DC 12V. Operating Voltage Range: 7~13.2V. PWM: Yes. Rated Current (Ampere): 0.27A [Max: 0.28A]. Locked Current: Polarity Protection. Power Consumption: less than or equal to 3.36W. Speed: 500-1800 plus minus 10% RPM. Max. Airflow: 104.62 CFM. Max. Air Pressure: 2.80 mm H2O. Noise Level: 36.57 dB(A). Fan Connector: 4 Pin Daisy-Chain. Cable Length: 140 mm / 5.51 in. MTBF (Life Expectance): 30000hrs at 50 degree celsius. Weight: 195 plus minus 10G.