All Categories
The First Care of Your Skin From Condition Check. The state of your skin changes little by little depending on everyday life such as ultraviolet ray during the day, skin stress, age, mental balance and so on. First of all it is important to know the condition of your skin. If you choose a lotion or facial cleanser according to that condition, you can perfect skin care for yourself. It's handy,Water content, oil content, flexibility are measured at once. It is easy-to-see liquid crystal display, it supports skincare! * 16% -22%: Good balance between moisture and oil, keep holding up. * 23% -33%: Balance between moisture and oil is normal, please carefully choose skin care products. * 34% -63%: Too much oil, please suppress oil. Points for skin care: * When moisture content (Moist) is low, we recommend that you refill the moisture firmly with lotion etc. If you have a lot of oil content (Oil), please drop the sebum firmly with a polite facial cleanser. If it is less, we recommend supplementing the oil content with cream and so on. How To Use: 1. Press "SCAN" once, turn on the backlight and "Bi" signal sound, then the data flashes on the LCD display. 2. After the LCD data is zeroed (this means that the dual LCD display shows 00.0%), we enter the test process. 3. Position the probe perpendicular to your skin and close to you skin(remember to press the probe as much as possible.) After approximately 3 seconds of "Bi" tone, the LCD will also display the percentage of moisture and oil content. 4. Press "SCAN" at anytime, it will enter the operation preparation process, and then you can retest your skin. 5. After 20 seconds of testing, the backlight will turn off, if there is no any operation for 40 seconds, the analyzer will automatically shut down. Measurement time: 3 seconds Battery: Two Weight: Approx.131-129g Package list: 1 x Skin Analyzer 1 x Manual