X

Sharpe Valves 1011TTE Series Brass Ball Valve, Inline, Lockable Lever Handle, 2-1/2" NPT Female, Non-Potable Water Use Only

Product ID : 30878638


Galleon Product ID 30878638
Model
Manufacturer
Shipping Dimension Unknown Dimensions
I think this is wrong?
-
19,692

*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown

Pay with

About Sharpe Valves 1011TTE Series Brass Ball

The Sharpe Valves 1011TTE series brass inline ball valve has a lockable lever handle and National Pipe Taper (NPT) male threads on both ends. This valve body is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Brass can be connected to copper, brass, plastic, aluminum, and welded steel. This valve has a lockable lever handle for manual on/off control. Polytetrafluoroethylene (PTFE) seats reduce the risk of leakage. The valve is full port for reduced friction; its inner diameter is the same as the inner diameter of the connecting pipe for maximum operating efficiency. This valve has female NPT threads for connecting to male threaded pipes, creating a tighter seal than straight threads. The maximum pressure rating is 600 pounds per square inch (gauge) (psig) for water, oil, and gas (WOG), and the maximum working temperature is 500 degrees Fahrenheit. Ball valves use a spherical disc to control the flow between pipes, tubes, or hoses. Flow is allowed when the hole that pierces the ball-shaped disc is in line with the inlet and outlet of the valve. Flow is blocked when the ball is horizontally swiveled 90 degrees, so that the hole of the ball is perpendicular to the opening of the valve. Ball valves can be referred to as full port or reduced port (also known as regular or standard port) depending on the inner diameter of the valve. A ball valve is full port if the hole of the ball is the same size as the inner diameter of the connecting pipeline (resulting in lower friction) and is reduced port if the hole of the valve is one pipe size smaller than the pipe, resulting in less flow through the valve than through the shaft of the pipe. Ball valves may have a handle or lever that aligns with the ball's position (open or closed) for manual operation. They are primarily used in air, gas, liquid, and steam applications.Sharpe Valves manufactures a wide variety of valves, including stainl