We specialize in hard to find items
All Categories
Reboot MIG Welder Equipment Flux Core,Gas and Gasless Welding Machine 160AMP 4 in 1 220V Digital Multiprocess Inverter MIG/Stick/TIG Welder Machine Supports 2LB/10LB Wire
Share Tweet
of brand new stock?
or
Need this item ASAP?
Check if this is available on Amazon
or available in other sites
Send us the link so we can buy for you
Reboot MIG Welder Equipment Flux Core,Gas and Features
-
【Reboot is an Amazon Exclusive Brand】👍[Multiprocess Welding] gasless(flux core wire) and gas(solid wire) welding :supports 2lbs/10lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel.Duty Cycle:40% at 160A and 100% at 120A
-
👍[SEE WHAT OUR CUSTOMER SAYS] Awesome welder. Couldn't be happier. The action on the stick and mig are very smooth. It is extremely powerful and I was able to penetrate 5/8 steel with both.Gasless works excellently. I taught a couple beginners on it without issue.
-
👍[Lift Tig Welder] not high frequency tig mode,just switch to “lift tig”on the panel and buy the WP17V tig torch from our store.Please refer the NO. 2 picture to connect the torch[Stick Welder] switch to “MMA” on the panel(arc welding) and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well
-
👍[Generator Supported] this MIG160 welder works well with a generator,but we suggest a 5000W above generator and 30A breaker needed
-
👍[Warranty] buy this welder machine with confidence as Reboot offers 1-year limited warranty and free consumables guarantee,besides,you will get a local supports for any assistance.Click on the add to cart button now!
About Reboot MIG Welder Equipment Flux Core,Gas And
Parameter: MIG/MMA/LIFT TIG/ARC 4 in 1 WELDING MACHINE Input power voltage: AC 220±15% Rated input power capacity: KVA 4.8 Input current : 19A for mig,23A for MMA Rated output current :160 Duty-cycle :85 % Output current range :30-160 A Output voltage range :15-22V Insulation class: F Protection class: IP21S Dimensions :535×305×345MM Weight :12KG Efficient: 85% Wire feeder: Inside Power factor cosφ 0.93 Welding thickness: ≥0.8 mm Diameter of wire: 0.8/1.0mm Troubleshooting: Why is my mig160 Welder not welding correctly? 1. Wire feed tension: Check the tension on the spooler. Is it set too tight or is the wire feed tension not set correctly? 2. Wire choice: Are you using .035” wire? We recommend .030-0.35" for best performance. 3. Stick out: Is your stick out too long? Your stick out should be no more than ½”. 4. Pull the trigger: To begin welding, pull the trigger on the MIG gun. 5. Proper grounding: The ground should not be attached to painted or coated metal.
