We specialize in hard to find items
All Categories
Gasland Gas Pressure Regulator, 1/2" NPT In/Out Gas Pipe, 1/2 PSI(3.5 kPa) Gas Inlet, 5"-10" WC Outlet Pressure, Gas Pressure Regulator for Liquefied Propane and Natural Gas, Easy To Install
Share Tweet
*Price and Stocks may change without prior notice
*Packaging of actual item may differ from photo shown
- Electrical items MAY be 110 volts.
- 7 Day Return Policy
- All products are genuine and original
- Cash On Delivery/Cash Upon Pickup Available
Gasland Gas Pressure Regulator, 1/2" NPT In/Out Gas Features
-
🎁【GAS TYPE & PRESSURE】Gas Type: Natural Gas(NG), Inlet gas pressure: 1/2 PSI, Outlet pressure: 10" Water Column. Liquid Propane(LP), Inlet gas pressure: 1.74 kPa, Outlet pressure: 5" Water Column.
-
🎁【PIPE THREAD SIZE】 1/2" Inlet & 1/2" Outlet NPT GAS PIPE. Make sure you measure the gas pipe or regulator opening as close to 1 inch as shown in the picture's table.
-
🎁【CAUTION】 This regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying.
-
🎁【MARKING】 Model: RTZ-ED, Marking: 1/2 PSIG, Po 3" - 6". Inlet pressure 1/2 PSI. Adjustable outlet pressure 3"-6" Water Column.
-
🎁【Excellent Customer Service】We have professional team to offer you excellent service. If you have any question, please feel free to contact us from Monday to Firday.
About Gasland Gas Pressure Regulator, 1/2" NPT In/Out Gas
Gasland chef gas pressure regulator has 1" openings for 1/2" gas pipes. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying. Do not install the regulator too close to the heating equipment or use in very cold environment.PRODUCT DESCRIPTIONBrand: Gasland chef Gas type: Natural Gas (NG) Inlet pressure (CSA rated and Maximum operating): 1/2 PSI (34 mbar) Outlet pressure range: 3” - 6” Water ColumnAmbient operating temperature range: 32°F - 225°F (0°C - 107°C) Refer to the pictures on how to find the correct pipe thread size. This regulator has 1/2" openings for 1/2" gas pipes. 1/2" IN and 1/2" OUT Female Pipe Thread. The 1/2" gas pipe means interior diameter 1/2" but outside diameter is 1", refer to the pictures before buying.ATTENTIONNOTE: GAS PRESSURE REGULATORS WILL NOT TURN OFF THE FLOW OF GASThe pipe fittings for this regulator are based on NPT pipe threads - dimensions according ANSI/ASME B1.20.1 standardsInstall the regulator properly with gas flowing as indicated by the arrow on the casting *NOTE - Do not install the regulator too close to the heating equipment or use in very cold environment. Heat or cold can change the resistance of the spring inside the regulatorKINDLY NOTEWARNING: The NPT thread size is NOT referring to the size of the thread itself! The plumbing industry standard for the pipe sizes is NOT always as straightforward as measuring the pipeMeasuring the pipe will often mislead you into choosing the wrong pipe sizeThe "pipe thread size" is measured and based on the inside of the pipeA lot of people measured the thread / the opening for the thread/outside diameter！
