All Categories
Get it between 2025-01-02 to 2025-01-09. Additional 3 business days for provincial shipping.
【Flow Switching Valve Design】: The siphon bulb is made of rubber, which starts siphoning liquid flow quickly. Both ends are designed with high quality plastic nut knob for better sealing to prevent slippage or leakage. Liquid transfer pump comes with a useful flow switching valve to start and stop the extractor.
【Quick Fuel Transfer】: The siphon pump can quickly and easily transfer fuel, water or other liquids from one container to another. And is meant to go down into a fuel tank without an anti-siphon filter. You just push the tube down, start pumping the pump and fuel starts to flow.
【Easy to Use】: This Lightweight and portable siphon hand fuel pump has an arrow to show the direction of the water, which is easy to use. Connecting the PVC hose, a few squeezes of the pump will get the liquid starting to flow, then put the lower hose into the receiver tank, the fluid will flow automatically.
【Multifunctional Transfer Pump】: Lightweight hand siphon fuel pump is enough for simple daily use, suits for medium and small type equipment without anti-theft filter net, such as brush cutter, lawn mover, hedge trimmer, snow blower, motorcycle, scooter, ATV, lawn tractor etc., not for big truck types.
【Warm Tip】: This hand pump used the pressure difference on the two sides to realize solution transfer. Solution should be transferred from higher place to lower place. The black pump should be placed under the solution, and bigger the height difference, better the use effect.
Specifications: Material: Rubber, PVC Color: Black Size: 10.43*2.56 inch/26.5*6.5 cm, Hose Length: 118 inch/3 m Package Includes: 1 * Gasoline Siphon Hose Pump (Includes 3m transfer hose) Compatibility: Universal Fit Instruction: 1. Put one side of the pump into oil or any solution, pressing the pump, then immediately plug the other side of the hand pump with your finger. 2. Release the hand pump, waiting for it to expand to normal size while oil or solution is injected into the pump. Then move away your finger. 3. Repeat step1 and step2 for 1-3 times to eject all the air in the tube to enable automatic flow of your solution. Attention: 1. The fluid you are trying to extract has to be higher than the influent bucket. 2. There's a mark "arrow" on the surface of hand pump. Please keep the arrow down before pumping. 3. The fitting end must kept inside of the fluid not just on the surface. 4. To extract the oil in the fuel tank of the car, there must be no anti-pumping filter in the fuel tank.