All Categories
Self-priming RV macerator pump: the RV macerator pump kit impeller with stainless steel wear plate, which reduces particle size to 1/8 inch (4 mm) maximum, and pumping the discharge to your sewer; If you like to boondock or just prefer to dump at home, treat yourself with this RV macerator pump
12V DC motor with 30s run dry protection: the macerator pump use a 12 volt DC power, fully enclosed, and comes with stainless steel shaft, can be connected to a car adapter with handheld ON or OFF switch; With 30 seconds run dry protection, this waste pump maximized the safety for every travel
3 Inches RV connector and 1 inch hose barb: this RV sewer pump comes with garden hose discharge port and water rinse capabilities, able to dump to a longer distance or easily drain holding tanks at home, easier to clean up and no more waiting in line and paying to dump at a public location
Simple operation and functional for trailers: you won't feel troubled when clean the sewer hose if you make the switch to incorporate this pump, the waste pump empties a 40 gallon holding tank in less than 5 minutes, but you should notice that it can't handle hard objects, sanitary napkins or rags
Widely applied in RV macerator tanks and valves: the macerator pump allows you to attach and remove the component easily, compatible with most pre-existing RV macerator holding tanks and release valves, and make your pump system work well; If you have any other questions, don't hesitate to contact us, we are always glad to help you
Feekoon 12V DC motor self-priming RV macerator pump Dumping trash in an easy way Specifications: Motor12V DC magnet type, fully enclosed, with stainless steel shaft. PumpSelf-priming flexible impeller with stainless steel wear plate. MaceratorStainless steel cutter reduces particle size to 1/8 inch (4 mm) maximum. Ports3 Inches RV connector, 1 inch hose barb. SealLip type. Tips for using: Step 1: remove end cap from drain pipe and install waste pump on drain in any convenient position, twisting clockwise to lock. (Be sure that o-ring is on pump adapter prior to installing unit.) Step 2: install waste or garden hose on discharge port adapter, and install rinse water hose to on-off valve, and then open black water valve, tum on the pump. Step 3: turn off pump and open gray water valve, let gray water backflush black water tank, and then turn on pump. Step 4: turn off pump, open the rinsing valve and back fill tanks for rinsing. And then turn on the pump, and turn off rinse water, drain tanks. Step 5: close both drain valves, turn on rinse water (40 PSI max.) and pump, rinse pump and discharge hose. Step 6: turn off water and pump, disconnect hose and pump, store until next use and replace end cap on drain pipe. Notice: Intermittent duty only. Do not run dry for more than 30 seconds. Do not mount permanently to the RV waste port.