UTUO Brushless Radial Blower Dual Ball Bearing High Speed 12V DC Centrifugal Fan with XH-2.5 Plug 120mm by 120mm by 32mm 4.72x4.72x1.26 inch

Pay with

UTUO Brushless Radial Blower Dual Ball Bearing High Features

• 42.45CFM @2800RMP (max.) 61.3dB-A (max.)

• 12V DC Voltage,0.95A Current Rated

• 2-pin XH-2.5 Fan Connector with 20cm+/-0.5 (8 inches) Cable (Red + Positive, Black-Negative)

• 120x120x32mm,Weight only 202g/pcs

• 2 pcs Ball bearings With Long Fan Life Expectancy (Non-waterproof)

About UTUO Brushless Radial Blower Dual Ball Bearing High

BASICAL INFORMATION Dimension: 120x120x32mm Screw Hole Spacing: 104.5 mm±0.5 Weight: 202g Connector: XH2.5-2P Cable Length: 20cm (8 inches) Noise: 61.30 dB-A AIR FLOW-AIR PRESSURE CHARACTERISTIC Applicable conditions: Shall be applied in the state when the standard, environmental conditions and voltage are fixed. Max. Air Flow: 42.45CFM Max. Static Pressure: 41.10mm-H2O RATED AND OPERATING CONDITLONS Rated voltage(VDC): 24V Rated current(A): 0.95A Rated input power(W): 11.4W Rated Speed(RPM/Min): 2800±10％ Startup voltage(VDC): 7V Operating voltage(VDC): 7.0-14.0V Operating temperature(℃): -10℃-+70℃ STRUCTURE AND FORM Bearing: Dual Ball Bearing Structure: Cross flow fan Housing: PBT+GF30% Blade: PBT+GF15% ELECTRICAL PROTECTION Locked Rotor Protection: Auto Power off after Locked at Rated Voltage for 1 sec. And Then Circuit Attempt to Restart in 2 to 6 Sec. Polarity Protection: Open Circuit when Vcc &GND are Exchanged Circuit Won't be burned within 5 sec. when Vcc &GND are exchanged. Insulation Resistance: At least 10MΩ at 500 VDC between Housing and Both Lead Wires. Electric Strength: Withstand 500 VAC 1 minute 1mA between Housing and Both Lead Wires